SFAB-600U-WQ10-2SA-M12 - Measurement Festo - Free user manual and instructions
Find the device manual for free SFAB-600U-WQ10-2SA-M12 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flow Sensor for Compressed Air |
| Model | SFAB-600U-WQ10-2SA-M12 |
| Brand | Festo |
| Measurement Range | 0.6 to 600 L/min (standard conditions) |
| Output Signal | Analog 0-10 V and pulse |
| Connection Type | Plug M12, 5-pin |
| Process Connection | G1/4 female thread |
| Operating Pressure | 0 to 10 bar |
| Media Temperature | 0 to 60 °C |
| Ambient Temperature | 0 to 50 °C |
| Accuracy | ±3% of measured value |
| Repeatability | ±0.5% |
| Power Supply | 24 V DC ±10% |
| Current Consumption | < 100 mA |
| Dimensions (W x H x D) | 50 x 90 x 50 mm |
| Weight | Approx. 150 g |
| Protection Class | IP65 |
| Maintenance | Clean with dry cloth; no moving parts |
| Safety Notes | To be installed by qualified personnel; avoid pressure exceeding max rating |
| Spare Parts | Available: sealing rings, mounting bracket (optional) |
| Repairability | Repairable by Festo service; no user-serviceable parts |
| General Information | Complies with EU directives for industrial use |
Frequently Asked Questions - SFAB-600U-WQ10-2SA-M12 Festo
What is the operating voltage for the Festo SFAB-600U-WQ10-2SA-M12?
The device operates at 24 V DC with a tolerance of ±10%.
How do I connect the flow sensor to a PLC?
Use the M12 connector (5-pin) for analog output (0-10 V) and pulse signal. Refer to the wiring diagram in the manual.
What is the maximum flow rate measurable by this sensor?
The maximum flow rate is 600 L/min under standard conditions (1 bar, 20 °C).
Can the SFAB-600U be used for liquids?
No, this sensor is designed for compressed air or non-aggressive gases only.
How accurate is the flow measurement?
Accuracy is ±3% of the measured value over the full range.
What maintenance does the sensor require?
Maintenance is minimal: periodically clean the exterior with a dry cloth and check connections for leaks.
Can the sensor be installed in any orientation?
It can be installed in any orientation, but for best accuracy, use horizontal installation with the flow arrow pointing in the correct direction.
What is the IP rating of the device?
The sensor has an IP65 rating, making it protected against dust and water jets.
Where can I find spare parts?
Spare parts like sealing rings and mounting brackets are available from Festo distributors.
What should I do if the sensor displays erratic readings?
Check for air leaks, ensure stable power supply, and verify that the flow is within the specified range. If problem persists, contact Festo support.
User questions about SFAB-600U-WQ10-2SA-M12 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SFAB-600U-WQ10-2SA-M12 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFAB-600U-WQ10-2SA-M12 by Festo.
USER MANUAL SFAB-600U-WQ10-2SA-M12 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SFAB-600U-WQ10-2SA-M12
Category : Measurement