SFAM-90-5000L-TG1-2SA-M12 - Measurement Festo - Free user manual and instructions
Find the device manual for free SFAM-90-5000L-TG1-2SA-M12 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compressed Air Flow Sensor |
| Model | SFAM-90-5000L-TG1-2SA-M12 |
| Measuring Range | 90 ... 5000 L/min (standard conditions) |
| Output Signal | 2 x switching outputs (PNP/NPN) + analog output 4...20 mA |
| Operating Voltage | 24 V DC (10...30 V DC) |
| Process Connection | G1/2" (TG1) |
| Electrical Connection | M12x1, 5-pin |
| Pressure Rating | Max. 10 bar |
| Medium | Compressed air, inert gases |
| Measuring Principle | Thermal (calorimetric) |
| Accuracy | ±3% of measured value ±0.3% of full scale |
| Repeatability | ±0.5% of measured value |
| Response Time | Typ. 100 ms |
| Temperature Range (Medium) | -10 ... 50 °C |
| Ambient Temperature | -10 ... 60 °C |
| Protection Class | IP65 |
| Material (Housing) | Aluminum, anodized |
| Material (Seals) | NBR |
| Dimensions (L x W x H) | Approx. 90 x 60 x 60 mm |
| Weight | Approx. 250 g |
| Maintenance | No moving parts; clean with a damp cloth if needed |
| Repairability | Non-repairable; replace unit if defective |
Frequently Asked Questions - SFAM-90-5000L-TG1-2SA-M12 Festo
How do I connect the SFAM-90-5000L-TG1-2SA-M12?
Use a 5-pin M12 connector. Pin 1: +24V, Pin 2: analog output, Pin 3: 0V, Pin 4: switching output 1, Pin 5: switching output 2. Refer to the manual for wiring details.
What is the measuring range of this flow sensor?
The sensor measures flow from 90 to 5000 L/min under standard conditions (20 °C, 1 bar absolute).
Can I use the SFAM-90-5000L with liquids?
No, it is designed for compressed air and inert gases only. Do not use with liquids.
How do I clean the flow sensor?
Clean the exterior with a soft, damp cloth. Avoid solvents. The sensing element is internal and does not require cleaning under normal conditions.
What is the output signal type?
It has two PNP switching outputs (configurable as NPN) and a 4-20 mA analog output proportional to flow.
How do I set the zero point?
With zero flow, press and hold the 'Set' button for 3 seconds until LED flashes. The zero point is saved automatically.
What is the maximum working pressure?
The maximum pressure is 10 bar. Exceeding this may damage the sensor.
Can the sensor be mounted in any orientation?
For best accuracy, mount horizontally with the display facing up. Refer to manual for orientation effects.
How do I interpret the analog output?
The 4-20 mA output scales linearly with flow: 4 mA = 0 L/min, 20 mA = 5000 L/min. Use a PLC or multimeter to read the current.
What do the LEDs indicate?
Green LED: power on. Yellow LED: switching output active. Flashing red: error or overrange.
User questions about SFAM-90-5000L-TG1-2SA-M12 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SFAM-90-5000L-TG1-2SA-M12 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFAM-90-5000L-TG1-2SA-M12 by Festo.
USER MANUAL SFAM-90-5000L-TG1-2SA-M12 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SFAM-90-5000L-TG1-2SA-M12
Category : Measurement