UPS-500 - Inverter Vorago - Free user manual and instructions
Find the device manual for free UPS-500 Vorago in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UPS Inverter |
| Brand | Vorago |
| Model | UPS-500 |
| Power Capacity | 500 VA / 300 W |
| Input Voltage | 220 VAC ± 10% |
| Output Voltage | 220 VAC ± 10% (battery mode) |
| Frequency | 50/60 Hz (auto sensing) |
| Battery Type | Sealed lead-acid, 12V / 7 Ah |
| Typical Backup Time | 10-20 minutes (half load) |
| Charging Time | 4-6 hours to 90% |
| Protection Features | Overload, short circuit, surge, battery deep discharge |
| Indicators | Power on, battery mode, low battery, fault LED |
| Alarms | Battery mode, low battery, overload |
| Outlets | 2-3 surge protected outlets |
| Dimensions (W x D x H) | Approx. 10 x 28 x 14 cm |
| Weight | Approx. 4.5 kg |
| Operating Temperature | 0°C - 40°C |
| Humidity | 0% - 90% non-condensing |
| Noise Level | < 40 dB |
| Repairability | Battery user-replaceable; other repairs by qualified technician |
| Cleaning | Wipe with dry cloth; do not use liquids |
| Storage | Dry, cool place, charge battery every 3 months |
Frequently Asked Questions - UPS-500 Vorago
How do I know if the UPS-500 is charging?
When connected to mains power, the Power On LED will illuminate and the battery will charge. If the UPS is in battery mode, the Battery Mode LED will be on and an alarm may sound.
What should I do if the UPS-500 alarms continuously?
A continuous alarm usually indicates a low battery or overload. Check the load connected to the UPS and reduce it if necessary. If the battery is low, allow it to recharge for several hours.
Can I connect a laser printer to the UPS-500?
Laser printers can draw high startup power that may overload the UPS. It is recommended to connect only PCs, monitors, and network equipment to the UPS. Avoid connecting printers or high-power devices.
How often should I replace the battery in the UPS-500?
The battery typically lasts 3-5 years depending on usage and environment. If the backup time becomes significantly shorter, replace the battery with the same type: 12V / 7Ah sealed lead-acid.
What does the 'fault' LED indicate?
The Fault LED lights up when there is an internal problem, such as a short circuit, overload, or battery wiring issue. Disconnect all loads and contact technical support.
Can I use the UPS-500 outdoors?
No, the UPS-500 is designed for indoor use only. Avoid exposure to rain, moisture, dust, and extreme temperatures.
How do I perform a self-test on the UPS-500?
Most UPS units have a self-test button. Press and hold the On/Off button for 2-3 seconds to simulate a power failure and test the battery. The UPS will switch to battery mode briefly.
What should I do if the UPS-500 does not turn on?
First, check the mains power and the power cord. Ensure the battery is connected properly. If the UPS still doesn't turn on, the battery may be completely discharged or defective. Try charging for 24 hours.
Is the UPS-500 suitable for medical equipment?
No, this UPS is not designed for life-support or medical devices. It is intended for general electronic equipment like computers and peripherals.
How do I recycle my old UPS-500 battery?
Lead-acid batteries must be recycled according to local regulations. Return the used battery to a recycling center or an authorized dealer. Do not dispose of it in household waste.
User questions about UPS-500 Vorago
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual UPS-500 - Vorago and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UPS-500 by Vorago.
USER MANUAL UPS-500 Vorago
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vorago
Model : UPS-500
Category : Inverter