UPS-400 - Inverter Vorago - Free user manual and instructions
Find the device manual for free UPS-400 Vorago in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Brand | Vorago |
| Model | UPS-400 |
| Input Voltage | 220V AC |
| Output Voltage | 220V AC |
| Power Capacity | 400 VA / 240 W |
| Frequency | 50/60 Hz |
| Battery Type | Sealed Lead-Acid |
| Battery Capacity | 7 Ah |
| Backup Time (Full Load) | 5 - 10 minutes |
| Charging Time | 6 - 8 hours |
| Output Waveform | Modified Sine Wave |
| Number of Outlets | 2 |
| Protection Features | Overload, Short Circuit, Surge Protection |
| Display | LED Indicators |
| Dimensions (W x D x H) | 30 x 15 x 20 cm |
| Weight | 5 kg |
| Cooling | Fan Cooled |
| Operating Temperature | 0 - 40 °C |
| Noise Level | < 40 dB |
| Certifications | CE, RoHS |
| Maintenance | Keep dry, clean vents; replace battery every 2-3 years |
Frequently Asked Questions - UPS-400 Vorago
What is the power capacity of the Vorago UPS-400?
The UPS-400 has a power capacity of 400 VA (approximately 240 W). It is designed to protect small electronic devices like computers, routers, and monitors.
How long does the battery backup last?
At full load (240 W), the backup time is about 5 to 10 minutes. With lighter loads, it can last longer. Actual time depends on battery health and power draw.
What type of battery does the UPS-400 use?
It uses a sealed lead-acid (SLA) battery with a capacity of 7 Ah. This battery is maintenance-free and replaceable.
How do I replace the battery?
Turn off the UPS and unplug it. Open the battery compartment, disconnect the old battery, and connect the new one following polarity. Reassemble and charge for 6-8 hours before use.
What devices can I connect to the UPS-400?
You can connect devices with a total power draw under 240 W. Examples include a desktop computer, monitor, router, and modem. Avoid high-power devices like printers or heaters.
What does the alarm beep mean?
A continuous beep indicates battery mode (power outage). A rapid beep signals low battery. If it beeps during normal operation, check for overload or battery fault.
Can the UPS-400 be used with a generator?
Yes, but the generator output should be stable (220V AC, 50/60Hz). Avoid using with generators that have poor voltage regulation, as it may cause the UPS to switch to battery frequently.
How do I maintain the UPS?
Keep the UPS in a clean, dry area with adequate ventilation. Avoid dust. Replace the battery every 2-3 years to ensure optimal performance.
What safety features does the UPS-400 have?
It includes overload protection, short circuit protection, and surge protection. These safeguard connected devices from power anomalies.
Does the UPS-400 have a USB port for monitoring?
No, the UPS-400 does not have a USB communication port. It provides basic LED indicators for power, battery, and fault status.
User questions about UPS-400 Vorago
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual UPS-400 - Vorago and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UPS-400 by Vorago.
USER MANUAL UPS-400 Vorago
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vorago
Model : UPS-400
Category : Inverter