cnPilot r200P - Access Point Cambium Networks - Free user manual and instructions
Find the device manual for free cnPilot r200P Cambium Networks in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor Wireless Access Point |
| Model | cnPilot r200P |
| Brand | Cambium Networks |
| Wi-Fi Standards | 802.11a/b/g/n/ac (Wave 2) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| MIMO Configuration | 2x2:2 MU-MIMO |
| Maximum Data Rate | 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Ethernet Ports | 1x Gigabit Ethernet (PoE In) |
| Power Supply | Power over Ethernet (802.3af/at) |
| Dimensions (W x D x H) | 155 x 155 x 35 mm |
| Weight | 0.25 kg |
| Mounting | Ceiling or wall mount (bracket included) |
| LED Indicators | Power, LAN, WLAN status |
| Management | cnMaestro cloud, local web UI |
| Security | WPA2/WPA3, 802.1X, RADIUS |
| Operating Temperature | 0°C to 45°C |
| Humidity | 5% to 95% non-condensing |
| Compliance | FCC, CE, IC, RoHS |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Spare Parts / Repairability | Professional repair only; no user-serviceable parts |
Frequently Asked Questions - cnPilot r200P Cambium Networks
How do I reset the Cambium Networks cnPilot r200P to factory defaults?
Press and hold the reset button (located on the rear panel) for at least 10 seconds until the LED blinks rapidly. The device will reboot with factory settings.
What power supply is required for the cnPilot r200P?
The access point supports Power over Ethernet (PoE) 802.3af/at. Use a PoE switch or a PoE injector (not included) to power it.
Can I mount the cnPilot r200P on a wall?
Yes, the device comes with a mounting bracket for ceiling or wall installation. Use the provided screws and anchors for secure mounting.
How do I access the web interface of the cnPilot r200P?
Connect to the device via Ethernet or Wi-Fi (default SSID is 'Cambium-XXXX'). Open a browser and enter the default IP address 192.168.0.1. Default credentials: admin/admin.
What does the LED status indicator mean?
Solid green: powered and operational. Blinking green: firmware upgrade or reset. Amber: booting or error. Off: no power.
How to update the firmware on cnPilot r200P?
Download the latest firmware from Cambium Networks support site. Log into web UI, go to Administration > Firmware Upgrade, upload the file, and reboot.
Is the cnPilot r200P compatible with cnMaestro?
Yes, it supports cnMaestro cloud management. You can adopt the AP via the cnMaestro portal using its serial number.
What Wi-Fi security modes are supported?
It supports WPA2-PSK, WPA3, and enterprise modes (WPA2/WPA3-Enterprise with 802.1X and RADIUS).
How many concurrent users can the cnPilot r200P handle?
Designed for up to 50-75 concurrent clients in typical office or retail environments, depending on traffic.
What is the warranty period for the cnPilot r200P?
Cambium Networks offers a limited lifetime warranty for hardware defects. Check your product serial number for exact terms.
User questions about cnPilot r200P Cambium Networks
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual cnPilot r200P - Cambium Networks and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. cnPilot r200P by Cambium Networks.
USER MANUAL cnPilot r200P Cambium Networks
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cambium Networks
Model : cnPilot r200P
Category : Access Point