58070 - Milling machine TORO - Free user manual and instructions
Find the device manual for free 58070 TORO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Milling Machine |
| Brand | Toro |
| Model | 58070 |
| Power Source | Gasoline Engine |
| Engine Type | 4-Stroke, Air-Cooled |
| Cutting Width | 14 inches (35.6 cm) |
| Milling Depth | Adjustable 0-4 inches (0-10 cm) |
| Dimensions (L x W x H) | 30 x 18 x 24 inches (76 x 46 x 61 cm) |
| Weight | 150 lbs (68 kg) |
| Fuel Capacity | 1.5 gallons (5.7 L) |
| Starting System | Recoil Start |
| Main Functions | Surface milling, concrete grinding, asphalt milling, groove cutting |
| Cutting Bits | Carbide-tipped, replaceable |
| Drive System | Belt-driven drum |
| Handle Type | Height-adjustable, ergonomic |
| Safety Features | Engine kill switch, protective guard, hand brake |
| Maintenance | Regular oil changes, air filter cleaning, bit inspection |
| Repairability | Modular design, easily accessible parts |
| Warranty | 2 years limited |
Frequently Asked Questions - 58070 TORO
How do I start the Toro 58070 milling machine?
Ensure fuel and oil levels are correct. Turn fuel valve on, close choke, set throttle to fast, pull recoil starter. Once warm, open choke.
What type of oil should I use?
Use SAE 10W-30 or 10W-40 engine oil with API service classification SF or higher.
How often should I change the oil?
Change oil after first 5 hours of use, then every 50 hours or annually.
Can I use this machine on asphalt?
Yes, the Toro 58070 is suitable for milling asphalt surfaces, but use appropriate cutting bits for asphalt.
How do I adjust the milling depth?
Use the depth adjustment knob on the side of the machine. Turn clockwise to increase depth, counterclockwise to decrease. Refer to manual for precise settings.
What is the maximum cutting width?
The maximum cutting width is 14 inches (35.6 cm).
How do I replace the cutting bits?
First, turn off engine and disconnect spark plug. Remove the belt guard, then remove retainer bolts and replace worn bits with new ones. Torque to specifications.
Why does the engine stall under load?
Check air filter and fuel filter for clogs. The engine may need tuning. Also ensure proper throttle position. If problem persists, consult a service center.
How do I clean the machine after use?
Allow engine to cool. Remove debris from undercarriage and drum. Wash with water if needed, but avoid electrical components. Dry thoroughly before storage.
Where can I find replacement parts?
Replacement parts are available at Toro authorized dealers or online. Use model number 58070 to find compatible parts.
User questions about 58070 TORO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual 58070 - TORO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 58070 by TORO.
USER MANUAL 58070 TORO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TORO
Model : 58070
Category : Milling machine