AX-LOC6.6-PRO - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AX-LOC6.6-PRO AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter (LOC) |
| Model | AX-LOC6.6-PRO |
| Brand | AXESS |
| Channels | 6 channels |
| Input Voltage | 12V DC (typical automotive) |
| Output Voltage | Up to 6.6V RMS per channel |
| Dimensions (L x W x H) | 5.5 x 3.5 x 1.2 inches |
| Weight | 0.5 lbs |
| Power Consumption | < 0.5A at 12V |
| Frequency Response | 10Hz - 40kHz |
| Signal-to-Noise Ratio | > 100dB |
| Total Harmonic Distortion | < 0.01% |
| Input Impedance | 10k ohms |
| Output Impedance | 100 ohms |
| Main Functions | Converts high-level speaker signals to low-level RCA outputs; adjustable gain control; remote turn-on |
| Protection Features | Short circuit, overvoltage, thermal protection |
| Maintenance | Keep dry; clean with soft cloth; no user-serviceable parts |
| Safety Precautions | Disconnect battery before installation; avoid moisture; use proper gauge wire |
| Certifications | CE, RoHS |
| Warranty | 1 year limited |
Frequently Asked Questions - AX-LOC6.6-PRO AXESS
What is the AX-LOC6.6-PRO used for?
The AX-LOC6.6-PRO is a line output converter that converts high-level speaker signals from a factory stereo into low-level RCA preamp outputs for connecting aftermarket amplifiers.
How many channels does it have?
It has 6 channels, allowing you to process signals for up to 6 speakers or amplifier channels.
What is the maximum output voltage?
The maximum output voltage is 6.6V RMS per channel, providing a strong signal for amplifiers.
How do I install the AX-LOC6.6-PRO?
Connect the high-level input wires to your speaker outputs, then connect the RCA outputs to your amplifier. Ensure the remote turn-on wire is connected to the amplifier's remote terminal.
Does it require an external power source?
Yes, it requires 12V DC power from the vehicle's electrical system, typically connected via the remote turn-on wire.
Can it be used with factory amplified systems?
Yes, it can accept high-level inputs from factory amplifiers, but ensure the input voltage does not exceed the maximum rating.
What is the frequency response?
The frequency response is 10Hz - 40kHz, covering the full audible range and beyond.
Is the AX-LOC6.6-PRO protected against damage?
Yes, it includes protection against short circuits, overvoltage, and thermal overload.
How do I adjust the gain?
Use the gain control knob on the unit to match the output level to your amplifier's input sensitivity.
What should I do if the unit gets hot?
Ensure proper ventilation and check for short circuits. If it continues to overheat, the unit may be faulty and should be replaced.
User questions about AX-LOC6.6-PRO AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AX-LOC6.6-PRO - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX-LOC6.6-PRO by AXESS.
USER MANUAL AX-LOC6.6-PRO AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AX-LOC6.6-PRO
Category : Uncategorized