AXTC-BM1 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXTC-BM1 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Audio Transmitter/Receiver |
| Model | AXTC-BM1 |
| Brand | AXESS |
| Bluetooth Version | 5.0 |
| Supported Profiles | A2DP, AVRCP, HSP, HFP |
| Range | Up to 10 meters (33 feet) |
| Battery Capacity | 200 mAh Lithium-ion |
| Battery Life | Up to 8 hours talk/music time |
| Charging Time | Approximately 2 hours |
| Charging Port | Micro USB 5V/500mA |
| Dimensions (L x W x H) | 5.2 x 2.5 x 1.0 cm (2.0 x 1.0 x 0.4 inches) |
| Weight | 12 grams (0.42 oz) |
| Audio Input | 3.5mm AUX, Digital Optical (Toslink) |
| Audio Output | 3.5mm AUX |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Main Functions | Bluetooth transmission, reception, hands-free calling, audio streaming |
| Care and Cleaning | Wipe with dry cloth; avoid liquids and abrasive cleaners |
| Safety Features | Overcharge protection, short circuit protection |
| Parts and Repairability | Battery not user-replaceable; contact AXESS support for repairs |
| General Information | Compatible with most Bluetooth enabled devices; supports multipoint connection |
Frequently Asked Questions - AXTC-BM1 AXESS
How do I pair the AXTC-BM1 with my phone?
Turn on the device and put it in pairing mode (hold the button until LED flashes red/blue). Enable Bluetooth on your phone and select AXTC-BM1 from the list.
Can I use this device while charging?
Yes, you can use the AXTC-BM1 while it is connected to a charger. However, charging may take longer if used simultaneously.
Why is there no sound from my speakers?
Ensure the device is properly connected via AUX or optical cable. Check that the Bluetooth connection is active and the volume is turned up on both the source and the speaker.
How do I switch between transmitter and receiver mode?
Press and hold the multifunction button for 5 seconds. The LED will blink differently: blue for transmitter mode, red for receiver mode. Release when desired mode is indicated.
What is the maximum Bluetooth range?
The AXTC-BM1 has a range of up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the effective range.
How do I reset the device?
To reset, turn off the device, then press and hold the multifunction button for 10 seconds until the LED flashes rapidly. Release and the device will reboot.
Can I connect two devices simultaneously?
Yes, the AXTC-BM1 supports multipoint connection, allowing you to pair two Bluetooth devices at the same time.
Does the device support aptX or other codecs?
The AXTC-BM1 supports SBC and AAC codecs. aptX is not supported.
How do I charge the device?
Connect the included micro USB cable to the device and a USB power adapter (5V). The LED will turn red during charging and blue when fully charged.
What should I do if the device is not recognized by my TV?
Ensure your TV has audio output (AUX or optical). Set the AXTC-BM1 to transmitter mode and select the correct input on the TV. If using optical, remove the plastic cap from the cable end.
User questions about AXTC-BM1 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXTC-BM1 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXTC-BM1 by AXESS.
USER MANUAL AXTC-BM1 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXTC-BM1
Category : Uncategorized