HD90-A3Q397PGU1 - Tumble dryer HAIER - Free user manual and instructions
Find the device manual for free HD90-A3Q397PGU1 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Haier |
| Model | HD90-A3Q397PGU1 |
| Product Type | Tumble Dryer |
| Capacity | 9 kg |
| Energy Class | A++ |
| Drying Technology | Heat Pump |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 48 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption (annual) | 235 kWh |
| Noise Level | 65 dB(A) |
| Number of Programs | 16 |
| Sensor Drying | Yes |
| Reverse Tumble Action | Yes |
| Delay Start | Yes, up to 24 hours |
| Child Lock | Yes |
| Filter Indicator | Yes |
| Water Container Full Indicator | Yes |
| Condenser Cleaning Indicator | Yes |
| Anti-Crease Phase | Yes, 30 minutes |
| Door Hinge | Left (reversible) |
| Warranty | 2 years |
Frequently Asked Questions - HD90-A3Q397PGU1 HAIER
How do I clean the lint filter on my Haier HD90-A3Q397PGU1 dryer?
Clean the lint filter after every drying cycle. Open the door, pull out the filter from the door opening, remove lint by hand or with a vacuum, rinse under running water if needed, and dry thoroughly before reinserting.
What should I do if the dryer displays an error code?
Refer to the user manual for error code meanings. Common codes: E1 (sensor failure), E2 (heating issue). Try resetting the appliance by unplugging for 30 seconds. If persistent, contact Haier support.
Can I install my Haier tumble dryer in a closet or small space?
Yes, but ensure adequate ventilation. The dryer needs at least 10 cm clearance on all sides. For heat pump models, the ambient temperature should be between 5°C and 35°C.
How do I clean the condenser on the HD90-A3Q397PGU1?
Locate the condenser unit (usually behind a flap at the bottom). Remove it, rinse with warm water to remove fluff, let it dry completely, and reinstall. Clean every 3-6 months or when indicator lights up.
What is the maximum load capacity for the delicate cycle?
For delicate items, reduce the load to 3-4 kg to prevent damage. Always check garment care labels.
Why does my Haier dryer take longer than expected to dry clothes?
Possible causes: overloaded drum, clogged lint filter, dirty condenser, low ambient temperature, or selected cycle not appropriate. Check and clean filters, and reduce load.
How can I change the door opening side on the HD90-A3Q397PGU1?
The door hinge is reversible. Unscrew the door hinge plate on the current side, move it to the opposite side, and reattach the door. Use the provided blanking plugs for holes.
Does the Haier HD90-A3Q397PGU1 require a vent to the outside?
No, it is a heat pump condenser dryer. It does not require external venting; water collects in a container that needs emptying or can be drained via a hose.
What is the energy consumption per cycle?
Approximately 1.5 kWh for a cotton dry cycle at full load. Actual consumption varies based on program and load.
Can I pause the drying cycle to add or remove clothes?
Yes, press the Start/Pause button to pause. Wait until the drum stops, then open the door. Close the door and press Start/Pause to resume.
User questions about HD90-A3Q397PGU1 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual HD90-A3Q397PGU1 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD90-A3Q397PGU1 by HAIER.
USER MANUAL HD90-A3Q397PGU1 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : HD90-A3Q397PGU1
Category : Tumble dryer