IPC3632SA-ADZK - Camera UniView - Free user manual and instructions
Find the device manual for free IPC3632SA-ADZK UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Camera |
| Model | IPC3632SA-ADZK |
| Resolution | 3 Megapixel (2048 x 1536) |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Minimum Illumination | 0.01 Lux (Color), 0 Lux with IR |
| IR Distance | Up to 30 m (98 ft) |
| Lens | 2.8 mm fixed lens |
| Field of View | Horizontal: 103°, Vertical: 55° |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 |
| Frame Rate | Up to 30 fps at 3MP |
| Network Interface | 10/100Mbps Ethernet (PoE) |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | ≤ 10W |
| Weatherproof Rating | IP67 |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Dimensions (Φ × L) | Φ 70 mm × 186 mm (2.76" × 7.32") |
| Weight | Approximately 0.5 kg (1.1 lbs) |
| Main Functions | IR Night Vision, Motion Detection, WDR, 3D DNR, Smart IR |
| Maintenance | Clean lens with soft cloth; check cable connections; keep firmware updated |
| Safety Precautions | Use compatible PoE switch; avoid exposure to extreme moisture; install according to manual |
| Spare Parts & Repairability | No user-serviceable parts; contact authorized service center for repairs |
| General Information | Warranty: 3 years; compatible with UniView NVRs and cloud services |
Frequently Asked Questions - IPC3632SA-ADZK UniView
How to reset the camera to factory defaults?
Press and hold the reset button located near the network port for 10 seconds using a paperclip. The camera will reboot and restore default settings.
How to access the camera remotely?
Ensure the camera is connected to the internet. Use the UniView app or software, or forward ports (e.g., 554 for RTSP) on your router and access via the camera's WAN IP.
What is the default IP address and login credentials?
Default IP is 192.168.1.200 (check label). Default username is admin; password is often blank or admin (refer to manual). Change immediately for security.
Does this camera support ONVIF?
Yes, this camera is ONVIF compliant (Profile S/G/T). It can integrate with third-party NVRs that support ONVIF.
How to update the firmware?
Download the latest firmware from the UniView support site. Access the camera's web interface, go to Settings > Maintenance > Firmware Upgrade, upload the file, and wait for reboot.
Can I mount the camera outdoors?
Yes, the camera has an IP67 weatherproof rating, making it suitable for outdoor use. Ensure all cable connections are sealed.
What is the maximum supported SD card capacity?
The camera supports a microSD card up to 128GB (Class 10 or higher) for local storage.
How to enable motion detection alerts?
Access the camera's web interface. Go to Events > Motion Detection, enable it, draw detection areas, and set sensitivity. Configure email or push notifications in alert settings.
Is two-way audio supported?
No, this model does not include a built-in microphone or speaker. It supports one-way audio output only via an external speaker if an audio jack is available.
What is the warranty period?
UniView offers a 3-year limited warranty against manufacturing defects. Contact support for claims.
User questions about IPC3632SA-ADZK UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual IPC3632SA-ADZK - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC3632SA-ADZK by UniView.
USER MANUAL IPC3632SA-ADZK UniView
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : UniView
Model : IPC3632SA-ADZK
Category : Camera