IDS20-2VS - Drill Stalco - Free user manual and instructions
Find the device manual for free IDS20-2VS Stalco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Drill |
| Model | IDS20-2VS |
| Brand | Stalco |
| Speed Settings | 2-speed variable speed (0-600 / 0-2500 RPM) |
| Chuck Capacity | 1.5 - 13 mm (1/16 - 1/2 in) |
| Power Supply | Corded, 230 V / 50 Hz |
| Power Rating | 850 W |
| Dimensions (L x W x H) | 300 x 70 x 180 mm |
| Weight | 1.8 kg |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Impact Function | Yes, for masonry drilling |
| Forward/Reverse | Yes |
| Adjustable Speed Trigger | Yes, with lock-on button |
| Safety Features | Double insulation, auxiliary handle, depth stop |
| Included Accessories | Depth stop, auxiliary handle, chuck key, belt clip |
| Maintenance | Regularly clean vents, replace carbon brushes when worn |
| Spare Parts Availability | Carbon brushes, chuck, switch, power cord |
Frequently Asked Questions - IDS20-2VS Stalco
What is the difference between speed 1 and speed 2 on the IDS20-2VS?
Speed 1 (0-600 RPM) provides high torque for driving screws or drilling large holes. Speed 2 (0-2500 RPM) is for faster drilling in wood or metal.
Can I use the drill for masonry?
Yes, the IDS20-2VS has an impact function that can be engaged for drilling into brick, concrete, or stone using appropriate masonry bits.
How do I change the drill bit?
Use the chuck key to loosen the chuck, insert the bit, then tighten by turning the chuck key clockwise. Ensure the bit is centered.
What is the maximum drilling capacity in steel?
The maximum drilling capacity in steel is 13 mm (1/2 inch).
Is the drill double insulated?
Yes, the drill features double insulation for safety, meaning no grounding is required.
How often should I replace the carbon brushes?
Carbon brushes should be checked after approximately 50 hours of use or when sparking becomes excessive. Replace them in pairs for optimal performance.
Can I use the drill for screwdriving?
Yes, the variable speed trigger and adjustable clutch (if equipped) make it suitable for screwdriving. Use low speed and gentle pressure.
What does the forward/reverse switch do?
The forward/reverse switch controls the rotation direction. Use forward for drilling and driving, reverse for removing screws or backing out stuck bits.
How do I maintain the drill?
Keep ventilation slots clean, wipe the body with a damp cloth, and periodically lubricate the chuck with light oil. Store in a dry place.
Where can I get spare parts?
Spare parts like carbon brushes, chuck, and power cord are available through Stalco service centers or authorized dealers. Check your manual for contact details.
User questions about IDS20-2VS Stalco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual IDS20-2VS - Stalco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IDS20-2VS by Stalco.
USER MANUAL IDS20-2VS Stalco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Stalco
Model : IDS20-2VS
Category : Drill