MBE8SP - Subwoofer Memphis Audio - Free user manual and instructions
Find the device manual for free MBE8SP Memphis Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Memphis Audio |
| Model | MBE8SP |
| Woofer Size | 8 inches |
| Enclosure Type | Sealed (ported optional) |
| Amplifier Power (RMS) | 150 Watts |
| Amplifier Power (Peak) | 300 Watts |
| Frequency Response | 30 Hz - 200 Hz |
| Impedance | 4 Ohms |
| Sensitivity | 86 dB |
| Dimensions (W x H x D) | 10.6 x 9.1 x 8.3 in (27 x 23 x 21 cm) |
| Weight | 12.1 lb (5.5 kg) |
| Power Supply | 12V DC (vehicle battery) |
| Fuse Rating | 15A |
| Input Type | RCA line level / speaker level |
| Adjustable Crossover | 50 Hz - 200 Hz low-pass filter |
| Phase Control | 0°/180° switchable |
| Remote Bass Control | Included wired remote |
| Mounting Location | Behind seat or trunk |
| Enclosure Material | MDF with carpet covering |
| Protection Circuits | Thermal, overcurrent, DC offset |
Frequently Asked Questions - MBE8SP Memphis Audio
What is the recommended amplifier power for the MBE8SP?
The MBE8SP is a powered subwoofer with a built-in amplifier rated at 150 watts RMS. No external amplifier is required.
How do I connect the subwoofer to my car stereo?
Use the RCA line-level inputs if your head unit has subwoofer pre-outs. Alternatively, use the speaker-level inputs by connecting to the speaker wires. Ensure proper polarity.
Can I install this subwoofer in a truck?
Yes, its compact size (10.6x9.1x8.3 in) fits under most truck seats or in the trunk. Follow the installation manual for secure mounting.
What is the frequency range of the MBE8SP?
The frequency response is 30 Hz to 200 Hz. The built-in low-pass filter allows you to adjust the crossover point between 50-200 Hz.
How do I adjust the bass level?
Use the remote bass control knob included. Connect it to the remote port on the subwoofer. You can also adjust the gain on the amplifier panel.
What power supply is needed?
The subwoofer operates on a 12V DC system typical of vehicles. Connect power directly to the battery with a 15A fuse in line.
How do I clean the subwoofer?
Use a damp cloth to wipe the enclosure. Avoid liquids near the vents. Do not use harsh chemicals. Clean the grille gently with a soft brush.
What should I do if the subwoofer stops working?
Check the power connections and fuse. Ensure the remote turn-on wire is connected. If no sound, test with another source. Contact Memphis Audio support if needed.
Is the subwoofer compatible with factory stereos?
Yes, use the speaker-level inputs to connect to factory speaker outputs. Adjust sensitivity to match the signal level.
What warranty does Memphis Audio offer?
Memphis Audio provides a 1-year warranty against defects in materials and workmanship. Keep your receipt for service.
User questions about MBE8SP Memphis Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual MBE8SP - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBE8SP by Memphis Audio.
USER MANUAL MBE8SP Memphis Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Memphis Audio
Model : MBE8SP
Category : Subwoofer