BRX1044 - Subwoofer Memphis Audio - Free user manual and instructions
Find the device manual for free BRX1044 Memphis Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10-inch Car Subwoofer |
| Speaker Size | 10 inches (254 mm) |
| Power Handling (RMS) | 400 Watts |
| Power Handling (Peak) | 800 Watts |
| Impedance | 4 Ohms (single voice coil) |
| Sensitivity | 89 dB (1W/1m) |
| Frequency Response | 25 Hz - 200 Hz |
| Mounting Depth | 5.5 inches (140 mm) |
| Cutout Diameter | 9.25 inches (235 mm) |
| Voice Coil | Dual 2-ohm or Single 4-ohm (verify model) |
| Magnet Weight | 50 oz (1.4 kg) |
| Recommended Enclosure Type | Sealed or ported (1.0-1.5 cu ft sealed, 1.5-2.0 cu ft ported) |
| Recommended Amplifier Power | 300-500 Watts RMS at 4 Ohm |
| Overall Dimensions (Diameter x Depth) | 10.6 x 6.5 inches (269 x 165 mm) |
| Weight | 12.5 lbs (5.7 kg) |
| Cone Material | Injected polypropylene with rubber surround |
| Terminals | Spring-loaded push terminals (accepts up to 10 AWG wire) |
| Safety Precautions | Do not exceed RMS power rating; use proper mounting hardware; keep away from moisture and heat |
| Maintenance & Cleaning | Wipe gently with a dry cloth; avoid solvents; inspect surround for cracks annually |
| Repairability | Contact authorized Memphis Audio service center for voice coil or surround repair |
| Recommended Amplifier | Deliver 300-500W RMS at 4Ω |
Frequently Asked Questions - BRX1044 Memphis Audio
What is the RMS power handling of the Memphis Audio BRX1044 subwoofer?
The BRX1044 has a RMS power handling of 400 watts and a peak power of 800 watts.
What impedance is the BRX1044 available in?
It typically comes as a 4-ohm single voice coil (SVC) or dual 2-ohm, depending on the variant. Check your model for exact spec.
What type of enclosure is recommended for the BRX1044?
For best sound quality, use a sealed enclosure (1.0-1.5 cu ft). For higher output, a ported enclosure (1.5-2.0 cu ft) is recommended.
How long is the break-in period for a new subwoofer?
Allow 20-30 hours of moderate playback at low to mid volume to loosen the suspension and improve sound quality.
Can I wire two BRX1044 subwoofers to a mono amplifier?
Yes, if each sub is 4-ohm SVC, you can wire them in parallel for a 2-ohm load or series for 8-ohm. Ensure your amp is stable at the resulting impedance.
What is the sensitivity of the BRX1044?
Sensitivity is rated at 89 dB (1W/1m), which is average for a 10-inch subwoofer.
What is the frequency response of the BRX1044?
The frequency response is 25 Hz to 200 Hz, making it suitable for deep bass extension.
What is the mounting depth of the BRX1044?
Mounting depth is 5.5 inches (140 mm). Ensure your enclosure has sufficient internal depth.
Does the BRX1044 come with a warranty?
Memphis Audio typically offers a 1-year warranty against manufacturing defects. Register your product to activate the warranty.
How should I clean and maintain the subwoofer?
Dust the cone and surround with a soft dry cloth. Avoid using any liquids or chemicals. Periodically check the surround for cracks or foam rot.
User questions about BRX1044 Memphis Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual BRX1044 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRX1044 by Memphis Audio.
USER MANUAL BRX1044 Memphis Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Memphis Audio
Model : BRX1044
Category : Subwoofer