GDG966AB - Range hood AEG - Free user manual and instructions
Find the device manual for free GDG966AB AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | AEG |
| Model | GDG966AB |
| Width | 90 cm |
| Height | 63 cm (min) - 113 cm (max) |
| Depth | 50 cm |
| Weight | 16 kg |
| Power Supply | 220-240 V, 50 Hz |
| Maximum Airflow | 720 m³/h |
| Noise Level (max) | 65 dB(A) |
| Number of Speeds | 4 + Boost |
| Control Type | Touch Control |
| Lighting | 2 x 3W LED |
| Grease Filter | 5-layer aluminium mesh, dishwasher safe |
| Carbon Filter | Optional, charcoal filter available |
| Ducted / Recirculating | Ducted (recirculating with optional carbon filter) |
| Energy Class | A+ |
| Annual Energy Consumption | 42 kWh/year |
| Safety Feature | Motor thermal protection |
| Warranty | 2 years |
Frequently Asked Questions - GDG966AB AEG
How do I install the range hood?
Installation must be performed by a qualified professional. Ensure the hood is installed at least 65 cm above electric hobs and 75 cm above gas hobs. Follow the instructions in the user manual for proper mounting and electrical connection.
How do I clean the grease filter?
The grease filter should be cleaned every 3 months or when the filter saturation indicator lights up. Remove the filter and wash it in a dishwasher or by hand with warm water and mild detergent. Allow it to dry completely before reinstalling.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, reset the indicator by pressing and holding the 'Reset' button for 3 seconds until the indicator turns off. Refer to the manual for exact button location.
How do I replace the carbon filter?
Carbon filters are used in recirculation mode. They cannot be washed and should be replaced every 6 months. Remove the grease filter first, then take out the old carbon filter and insert the new one. Reinstall the grease filter.
Why is the range hood noisy?
Noise can be caused by improper installation, loose parts, or a clogged filter. Ensure the hood is securely mounted and that filters are clean. If noise persists, contact service.
How do I adjust the brightness of the LED lights?
This model features 2-level LED lighting. Press the light button once for full brightness, again for half brightness, and a third time to turn off. Not all models have dimmable lights; check the manual.
What should I do if the hood does not turn on?
Check if the power cord is plugged in and the circuit breaker has not tripped. Also, ensure the thermal protector has not triggered due to overheating. If it still does not work, contact a technician.
How do I change the speed?
Use the control panel buttons: press the '+' button to increase speed and the '-' button to decrease. There are 4 speeds plus a boost function for maximum airflow.
How do I activate the boost function?
Press and hold the '+' button for 2 seconds to activate boost mode. The hood will run at maximum speed for 10 minutes and then return to the previous speed.
Where can I find spare parts for the GDG966AB?
Spare parts such as filters, LED modules, and control boards can be ordered from authorized AEG service centers or online through the AEG website using the model number GDG966AB.
User questions about GDG966AB AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual GDG966AB - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GDG966AB by AEG.
USER MANUAL GDG966AB AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : GDG966AB
Category : Range hood