APLS08 - Air Conditioning GE - Free user manual and instructions
Find the device manual for free APLS08 GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Brand | GE |
| Model | APLS08 |
| Cooling Capacity (BTU) | 8,000 BTU |
| Voltage | 115 V |
| Frequency | 60 Hz |
| Power Consumption (Cooling) | 7.5 Amps |
| Dimensions (Width x Depth x Height) | 18.5 in x 12.5 in x 12.0 in |
| Weight | 55 lbs |
| Airflow (CFM) | 220 CFM |
| Refrigerant Type | R-32 |
| Thermostat Control | Digital with Remote Control |
| Fan Speeds | 3 (High, Medium, Low) |
| Cooling Modes | Cool, Fan Only, Energy Saver |
| Sleep Mode | Yes |
| Timer Function | 24-Hour On/Off Timer |
| Filter Type | Washable Mesh Filter |
| Filter Clean Indicator | Yes |
| Installation Type | Window Mount |
| Warranty | 1 Year Parts and Labor |
Frequently Asked Questions - APLS08 GE
How do I install the GE APLS08 air conditioner?
Refer to the installation manual. Place the unit in a window, secure with brackets, and seal gaps. Ensure proper drainage and electrical connection.
How often should I clean the filter?
Clean the filter every month during heavy use or every two weeks in dusty conditions. Wash with warm water and mild detergent, then dry before reinserting.
What does the 'Energy Saver' mode do?
Energy Saver mode cycles the fan on and off with the compressor to reduce energy consumption while maintaining comfort.
Why is my air conditioner not cooling?
Check if the filter is dirty, thermostat set correctly, and window sealing intact. If problem persists, consult the troubleshooting section of the manual.
Can I use an extension cord?
No, do not use an extension cord. Plug directly into a grounded outlet. Extension cords can cause voltage drop and fire hazards.
How do I clean the unit exterior?
Wipe with a soft damp cloth and mild soap. Avoid abrasive cleaners. Do not spray water directly on the unit.
What does the error code E1 mean?
E1 indicates a room temperature sensor failure. Unplug for 30 seconds and restart. If code persists, contact service.
What is the recommended room size?
The APLS08 is suitable for rooms up to 350 sq. ft. For larger rooms, consider a higher BTU model.
How do I replace the remote batteries?
Slide the battery cover back, remove old batteries, insert two AAA batteries (polarity marked), and replace the cover.
Can I leave the air conditioner in the window during winter?
It is recommended to remove and store the unit indoors during winter to prevent damage from freezing temperatures.
User questions about APLS08 GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual APLS08 - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APLS08 by GE.