BINGSTA 604.542.34 - Chair IKEA - Free user manual and instructions
Find the device manual for free BINGSTA 604.542.34 IKEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chair |
| Brand | IKEA |
| Model | BINGSTA 604.542.34 |
| Dimensions - Height | Approx. 43 cm (seat height) |
| Dimensions - Width | Approx. 47 cm |
| Dimensions - Depth | Approx. 50 cm |
| Weight | Approx. 4.5 kg |
| Maximum Load | 100 kg |
| Material | Solid wood (pine or birch) |
| Finish | Clear lacquer |
| Assembly Required | Yes, instructions included |
| Care Instructions | Wipe with a damp cloth; use a mild cleaner if needed |
| Safety Warnings | Do not rock or tilt the chair; use only on level surfaces |
| Spare Parts Availability | Available through IKEA customer service |
| Repairability | Designed for repair; screws and wooden parts can be replaced |
| Country of Origin | Manufactured in Poland |
Frequently Asked Questions - BINGSTA 604.542.34 IKEA
How do I assemble the BINGSTA chair?
Follow the included assembly manual step by step. You will need a Phillips screwdriver and a hammer (optional). All parts and screws are labeled.
What is the weight capacity of the BINGSTA chair?
The maximum load is 100 kg (220 lbs). Do not exceed this limit to avoid damage.
What material is the BINGSTA chair made of?
It is made of solid pine wood with a clear lacquer finish.
How should I clean the BINGSTA chair?
Wipe with a damp cloth and a mild non-abrasive cleaner. Avoid harsh chemicals or soaking the wood.
Can the BINGSTA chair be used outdoors?
No, it is designed for indoor use only. Exposure to moisture or sunlight may damage the wood.
Does the BINGSTA chair require any maintenance?
Periodically check and tighten screws if necessary. Reapply lacquer if the wood becomes dry.
Is the BINGSTA chair stackable?
No, it is not designed for stacking. Stacking may cause instability or damage.
Where can I find spare parts for the BINGSTA chair?
Spare parts can be ordered through IKEA customer service or at the IKEA spare parts counter.
What tools are needed for assembly?
A Phillips screwdriver and a rubber mallet (optional) are needed. All hardware is included.
How long does assembly take?
Assembly typically takes 15–30 minutes for one person.
User questions about BINGSTA 604.542.34 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chair in PDF format for free! Find your manual BINGSTA 604.542.34 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BINGSTA 604.542.34 by IKEA.
USER MANUAL BINGSTA 604.542.34 IKEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IKEA
Model : BINGSTA 604.542.34
Category : Chair