BRC214SA - Range hood BeefEater - Free user manual and instructions
Find the device manual for free BRC214SA BeefEater in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | BeefEater |
| Model | BRC214SA |
| Dimensions (W x D x H) | 900 x 500 x 600 mm |
| Weight | 15 kg |
| Power Supply | 220-240V, 50Hz, 200W |
| Maximum Airflow | 600 m³/h |
| Noise Level | 65 dB(A) |
| Number of Speeds | 3 |
| Control Type | Electronic push button |
| Lighting | 2 x 1.5W LED |
| Grease Filter | Aluminum mesh, washable |
| Charcoal Filter | Optional, replaceable |
| Installation Type | Ducted or recirculating |
| Duct Diameter | 150 mm |
| Energy Class | A |
| Safety Features | Thermal cut-off, auto shut-off |
| Maintenance | Clean grease filter monthly, replace charcoal filter every 3-6 months |
| Spare Parts | Grease filter, charcoal filter, LED bulbs |
| Warranty | 2 years |
Frequently Asked Questions - BRC214SA BeefEater
How do I install the range hood?
Installation should be carried out by a qualified professional. The hood must be mounted at a minimum height of 65 cm above electric cooktops and 75 cm above gas cooktops. Ensure the ducting (if using exhaust mode) is properly connected and sealed. Refer to the installation manual for detailed steps.
How often should I clean the grease filters?
The aluminum mesh grease filters should be cleaned every month or more frequently if cooking heavily. They can be washed in the dishwasher or by hand with mild detergent. Ensure they are completely dry before reinstalling.
How do I replace the charcoal filter?
The charcoal filter is used in recirculating mode. It should be replaced every 3 to 6 months depending on usage. To replace, remove the grease filters, then slide out the old charcoal filter and insert a new one. Ensure the filter is correctly oriented.
Why is my range hood noisy?
Excessive noise can be due to loose parts, blocked ducts, or a dirty filter. Check that the hood is securely mounted, ducts are clear, and filters are clean. If noise persists, contact customer service.
How do I replace the LED light?
The LED bulbs are typically integrated and may require a technician to replace. If the light fails, disconnect power, then remove the light cover and replace the LED module with an identical spare part. If unsure, consult a professional.
Can I use the range hood without ducting?
Yes, this model supports recirculating mode. You will need to install a charcoal filter to absorb odors. The air is filtered and recirculated back into the kitchen.
What size duct is required?
The required duct diameter is 150 mm. Use rigid or flexible ducting with the same diameter for optimal airflow. Keep the duct length as short as possible with minimal bends.
How do I reset the filter cleaning indicator?
After cleaning or replacing the filters, press and hold the reset button (usually labeled) for about 3 seconds until the indicator turns off. Refer to the user manual for exact location.
Is the range hood suitable for gas cooktops?
Yes, it is suitable for both electric and gas cooktops. Ensure the minimum installation height above gas cooktops is 75 cm to avoid flame interference.
Where can I purchase replacement parts?
Replacement parts such as grease filters, charcoal filters, and LED bulbs can be purchased from authorized BeefEater dealers or online retailers. Use the model number BRC214SA to ensure compatibility.
User questions about BRC214SA BeefEater
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BRC214SA - BeefEater and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRC214SA by BeefEater.
USER MANUAL BRC214SA BeefEater
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeefEater
Model : BRC214SA
Category : Range hood