BS27300 - Range hood BeefEater - Free user manual and instructions
Find the device manual for free BS27300 BeefEater in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Under-cabinet range hood |
| Brand | BeefEater |
| Model | BS27300 |
| Width | 900 mm |
| Depth | 500 mm |
| Height | 150 mm |
| Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 200 W |
| Extraction Rate | 1000 m³/h |
| Number of Speeds | 3 + boost |
| Noise Level (max) | 65 dB(A) |
| Type of Control | Soft-touch buttons |
| Lighting | 2 x 1.5 W LED |
| Filter Type | Aluminum mesh grease filter |
| Duct Diameter | 150 mm |
| Operation Mode | Ducted or recirculating |
| Material | Stainless steel |
| Energy Class | A |
| Warranty | 2 years |
Frequently Asked Questions - BS27300 BeefEater
How do I install the BeefEater BS27300 range hood?
Installation should be performed by a qualified professional. Ensure the hood is mounted at least 650 mm above cooking surface for gas cooktops and 550 mm for electric. Use the provided template and fixings for secure attachment to a solid wall or cabinet. Connect the ducting if using ducted mode or install charcoal filters for recirculation.
How often should I clean the grease filters?
Clean the aluminum mesh filters every month or when the filter saturation indicator lights up. Wash them by hand with warm soapy water or in the dishwasher (low temperature cycle). Dry thoroughly before reinstalling.
Why is my range hood making excessive noise?
Noise can increase due to clogged filters, loose ductwork, or a blocked exhaust. Check filters first and clean if needed. Ensure all duct connections are tight. If noise persists, contact customer service.
Can I use the hood without ducting?
Yes, the hood can be used in recirculation mode. You need to install charcoal filters (not included) to absorb odors. The filters should be replaced every 3-6 months depending on usage.
How do I change the LED lights?
LED lights are integrated and should be replaced by a qualified technician. If a light fails, contact BeefEater support for assistance. Do not attempt to replace them yourself.
What should I do if the hood is not extracting properly?
First, ensure that filters are clean and ducting is not blocked. Check that the hood is set to a high enough speed. If using recirculation mode, verify charcoal filters are not saturated. If problems persist, inspect the motor or call service.
Does the hood have a timer function?
Yes, the BS27300 includes a timer that can be set to automatically turn off the hood after a selected period (e.g., 10 minutes). Refer to the user manual for instructions.
Are the filters dishwasher safe?
Yes, the aluminum grease filters can be washed in a dishwasher. Use a gentle program and avoid high temperatures. Remove the filters and place them vertically in the dishwasher. Dry completely before reinstallation.
What is the warranty period and what does it cover?
The BeefEater BS27300 comes with a 2-year warranty covering manufacturing defects. It does not cover damage from improper installation, misuse, or normal wear and tear. Retain proof of purchase.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the filter alarm button for 3 seconds until the indicator light turns off. This resets the timer for the next cycle.
User questions about BS27300 BeefEater
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BS27300 - BeefEater and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BS27300 by BeefEater.
USER MANUAL BS27300 BeefEater
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeefEater
Model : BS27300
Category : Range hood