AFR6X - Range hood Artusi - Free user manual and instructions
Find the device manual for free AFR6X Artusi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Artusi |
| Model | AFR6X |
| Width | 600 mm |
| Depth | 500 mm |
| Height | 150 mm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 250 W |
| Extraction Rate (Max) | 650 m³/h |
| Noise Level (Max) | 65 dB(A) |
| Number of Speeds | 3 |
| Control Type | Slide Switch |
| Lighting | 2 x 3W LED |
| Filter Type | Aluminum Grease Filter (washable) |
| Carbon Filter | Optional (sold separately) |
| Ducting Diameter | 150 mm |
| Installation Type | Under Cabinet |
| Safety Features | Motor Thermal Cut-out |
| Maintenance | Clean grease filter monthly |
| Spare Parts Available | Grease filter, carbon filter, LED lamp |
Frequently Asked Questions - AFR6X Artusi
How to install the Artusi AFR6X range hood?
Ensure the hood is installed at the recommended height above the cooktop (typically 650-750 mm for electric, 650-750 mm for gas). Secure the hood to the underside of the cabinet using the provided screws and brackets. Connect the ducting to the outlet if using external extraction, or install a carbon filter for recirculation mode. Finally, connect the power supply.
How to clean the grease filter?
Remove the aluminum grease filter by sliding it out. Wash it with warm soapy water or in a dishwasher at low temperature. Ensure it is completely dry before reinstalling. Clean at least once a month to maintain performance.
How often should I replace the carbon filter?
If using the hood in recirculation mode, replace the carbon filter every 3 to 6 months, or more often if cooking frequently. Check the filter condition regularly; a clogged filter reduces efficiency.
The hood is noisy, what can I do?
Noise can be caused by loose parts, dirty filters, or improper installation. Check that the hood is securely mounted and all screws are tight. Clean or replace the grease filter. If using ducting, ensure ducts are not blocked. For persistent noise, contact customer service.
How to replace the LED lamp?
Disconnect the hood from power. Locate the LED lamp holder; it may be accessible from the front or underneath. Gently pull out the old lamp and insert a new one of the same type (e.g., 3W LED). Ensure the lamp is securely in place before restoring power.
The hood doesn't work, what to check?
First, check the power supply: ensure the plug is inserted and the circuit breaker is on. Check if the motor thermal cut-out has tripped; allow the motor to cool down and reset. Also inspect the control switch for any damage. If none of these help, consult the manual or contact support.
Can I use the hood without ducting (recirculation)?
Yes, the Artusi AFR6X can be used in recirculation mode. You will need to install a carbon filter (sold separately) to absorb odors. The filtered air is then recirculated back into the kitchen.
What is the extraction rate of the AFR6X?
The maximum extraction rate is 650 m³/h. This may vary depending on ducting length and installation. For best performance, keep ducts as short and straight as possible.
How to adjust the fan speed?
The hood has a slide switch on the front panel. Slide it to the desired position: Low, Medium, or High. Some models may have a separate switch for light and fan.
Is the grease filter dishwasher safe?
Yes, the aluminum grease filter can be cleaned in a dishwasher. Use a low temperature cycle (max 65°C) and avoid harsh detergents. To prevent damage, place it securely in the top rack.
User questions about AFR6X Artusi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual AFR6X - Artusi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AFR6X by Artusi.