Audio I/O - Keyboard Intellijel - Free user manual and instructions
Find the device manual for free Audio I/O Intellijel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Eurorack synthesizer module |
| Brand | Intellijel |
| Model | Audio I/O |
| Form factor | 3U Eurorack module |
| Width | 4 HP (approx. 20 mm) |
| Depth | 26 mm (including ribbon cable) |
| Weight | Approx. 85 g |
| Power consumption | +12V: 50 mA, -12V: 20 mA |
| Power connector | 10-pin ribbon cable (Eurorack standard) |
| Audio inputs | 2 mono (dual 1/4" TS jacks) |
| Audio outputs | 2 mono (dual 1/4" TS jacks) |
| Input impedance | 100 kΩ |
| Output impedance | 100 Ω |
| Maximum input level | +20 dBu |
| Maximum output level | +20 dBu |
| Frequency response | 20 Hz – 20 kHz (±0.5 dB) |
| Signal-to-noise ratio | > 100 dB |
| THD+N | < 0.01% |
| Main functions | Balanced/unbalanced audio conversion, level adjustment |
| Installation | Mount in Eurorack case with standard screws, connect power ribbon |
| Maintenance and cleaning | Wipe with dry cloth, avoid liquids and static discharge |
| Safety precautions | Turn off power before installing or removing, avoid contact with conductive surfaces |
| Spare parts and repairability | No user-serviceable parts; contact Intellijel for repairs |
| General information | Designed for Eurorack modular synthesizers, provides high-quality I/O |
Frequently Asked Questions - Audio I/O Intellijel
What is the Audio I/O module used for?
The Audio I/O is a Eurorack module that converts balanced line-level signals to and from modular levels, allowing integration with external audio gear.
What are the power requirements for the Audio I/O?
It requires +12V at 50 mA and -12V at 20 mA, connected via a standard 10-pin ribbon cable.
How do I connect the Audio I/O to my Eurorack case?
Mount it using the included screws and connect the power ribbon cable, ensuring correct orientation (red stripe for -12V).
What is the width of the Audio I/O module?
The module is 4 HP wide (approximately 20 mm).
Can I use the Audio I/O with balanced cables?
Yes, the inputs and outputs accept balanced TRS jacks for reduced noise.
What is the maximum input level?
It handles up to +20 dBu, suitable for most studio equipment.
Is the module compatible with all Eurorack cases?
Yes, as long as the case provides +/-12V power and has at least 4 HP of space.
How do I clean the module?
Use a dry, lint-free cloth. Avoid liquids and ensure the module is unpowered during cleaning.
What should I do if the module is not working?
Check the power cable orientation and connection. If issues persist, contact Intellijel support.
Does the module come with a warranty?
Intellijel offers a standard limited warranty; check the manual or website for details.
User questions about Audio I/O Intellijel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual Audio I/O - Intellijel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Audio I/O by Intellijel.
USER MANUAL Audio I/O Intellijel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellijel
Model : Audio I/O
Category : Keyboard