XFADE 1U - Keyboard Intellijel - Free user manual and instructions
Find the device manual for free XFADE 1U Intellijel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Eurorack module |
| Brand | Intellijel |
| Model | XFADE 1U |
| Category | Keyboard (module) |
| Format | 1U (Eurorack tile) |
| Width | 8 HP (approx. 40 mm) |
| Depth | 30 mm (typical panel depth) |
| Power consumption | +12V: 50 mA, -12V: 50 mA |
| Power connector | 10-pin Eurorack ribbon cable |
| Audio inputs | 2 (left and right stereo pair) |
| Audio outputs | 2 (left and right stereo pair) |
| CV inputs | 1 (for crossfade control) |
| Crossfade curve | Equal power (constant power crossfade) |
| Level control | Manual crossfade knob with CV attenuverter |
| Indicator | LED for crossfade position |
| Construction | Aluminum front panel, PCB circuit board |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Low voltage; do not expose to moisture |
| Spare parts | Contact Intellijel support for replacement knobs or jacks |
| Repair | No user-serviceable parts; contact manufacturer |
Frequently Asked Questions - XFADE 1U Intellijel
What is the XFADE 1U used for?
The XFADE 1U is a crossfader module for Eurorack systems, designed to smoothly transition between two stereo audio sources. It can be used for mixing, fading, or creating dynamic soundscapes.
Does the XFADE 1U work with any Eurorack case?
Yes, it fits any standard Eurorack case that supports 1U tiles (Intellijel or PulpLogic format). It requires a 1U height slot and a +12V/-12V power supply via a 10-pin ribbon cable.
How do I connect the XFADE 1U to my system?
Connect the included power cable to your Eurorack bus board, ensuring correct polarity (red stripe indicates -12V). Then patch your audio sources to the inputs and route the outputs to your mixer or output module.
Can I control the crossfade with CV?
Yes, the XFADE 1U has a CV input with an attenuverter that allows you to control the crossfade position using control voltages. The knob sets the manual position and the CV adds to it.
What is the power consumption of the XFADE 1U?
The module draws approximately 50 mA from the +12V rail and 50 mA from the -12V rail. Ensure your power supply can handle this load.
Does the XFADE 1U support mono signals?
Yes, you can use it with mono signals by patching the same signal to both left and right inputs, or by using only the left channel. The crossfade will work on the mono signal.
Is the crossfade curve equal power or equal gain?
The XFADE 1U features an equal power crossfade curve, which maintains a constant perceived loudness during the fade, ideal for smooth transitions.
How do I clean and maintain the XFADE 1U?
Use a soft, dry cloth to clean the front panel. Avoid using liquids or abrasive cleaners. Ensure the module is unpowered before cleaning.
What should I do if the module stops working?
First, check the power cable connections and ensure the module is properly seated. If the issue persists, contact Intellijel support for troubleshooting or repair. Do not attempt to open the module.
Can I use the XFADE 1U with other 1U systems?
The XFADE 1U is designed for the Intellijel 1U tile format. It may fit other 1U systems with compatible mounting holes (e.g., PulpLogic), but verify physical compatibility before purchase.
User questions about XFADE 1U Intellijel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual XFADE 1U - Intellijel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XFADE 1U by Intellijel.
USER MANUAL XFADE 1U Intellijel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellijel
Model : XFADE 1U
Category : Keyboard