LR-200 - Épilateur à peluches Orava - Free user manual and instructions
Find the device manual for free LR-200 Orava in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lint Remover / Fabric Shaver |
| Brand | Orava |
| Model | LR-200 |
| Power Source | 2 x AA batteries (not included) |
| Motor Speed | Approx. 6000 RPM |
| Blade Material | Stainless Steel |
| Trimming Height Settings | 2 adjustable levels |
| Operating Time | Up to 2 hours on fresh batteries |
| Weight | Approx. 150 g (without batteries) |
| Dimensions | Approx. 15 x 7 x 5 cm |
| Color | White / Blue (as pictured) |
| Accessories Included | Cleaning brush, protective cap |
| Warranty | 2 years |
| Safety Features | Automatic shut-off when cap removed, rounded blade guard |
| Cleaning Method | Remove lint container, brush blades with included brush |
| Intended Use | For removing lint, pills, and fuzz from fabrics |
| Suitable Fabrics | Cotton, wool, polyester, blends |
| Repairability | Replaceable blade cartridge; battery compartment accessible |
Frequently Asked Questions - LR-200 Orava
How do I insert batteries into the Orava LR-200?
Slide the battery cover open at the bottom of the device. Insert 2 AA batteries following the polarity markings (+/-) inside the compartment. Close the cover until it clicks.
Why does the device not turn on?
Check if batteries are installed correctly and have enough charge. Ensure the protective cap is removed. If still not working, try fresh batteries.
Can I use the LR-200 on delicate fabrics?
Yes, but adjust to the lowest trimming height setting and test on an inconspicuous area first. Avoid prolonged contact on one spot to prevent damage.
How do I clean the lint remover?
After use, open the lint container and empty it. Use the included brush to clean the stainless steel blades. Do not rinse with water; wipe the exterior with a dry cloth.
What should I do if the blades become dull?
The blades are replaceable. Contact Orava support or consult the manual for the correct replacement blade cartridge (model LR-200-BL). Replace as instructed.
How do I adjust the trimming height?
Turn the dial or slider on the side of the device to choose between two height settings (usually for thicker or thinner fabrics). Refer to the markings on the device.
Is the LR-200 suitable for removing pet hair?
It is designed for lint and pills on clothing, not for heavy pet hair. However, it can remove some surface hair from fabrics. For best results, use a lint roller first.
Can I use the device while charging?
This model is battery-powered only and does not have a rechargeable battery. It cannot be used while charging. Replace batteries when depleted.
Why is the lint container not staying in place?
Ensure the container is aligned correctly and pushed in until it clicks. If it still does not lock, check for debris on the locking mechanism and clean it gently.
What is the warranty period for the LR-200?
The Orava LR-200 comes with a 2-year warranty against manufacturing defects. Keep your proof of purchase and contact Orava customer service for assistance.
User questions about LR-200 Orava
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Épilateur à peluches in PDF format for free! Find your manual LR-200 - Orava and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LR-200 by Orava.
USER MANUAL LR-200 Orava
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Orava
Model : LR-200
Category : Épilateur à peluches