MT-330 - Thermometer Orava - Free user manual and instructions
Find the device manual for free MT-330 Orava in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Orava |
| Model | MT-330 |
| Product Type | Digital Thermometer |
| Measurement Range | -50°C to +300°C (-58°F to +572°F) |
| Accuracy | ±1°C (±1.8°F) in the range -20°C to +200°C |
| Resolution | 0.1°C (0.1°F) |
| Display | LCD with backlight |
| Power Source | 1 x CR2032 3V battery |
| Battery Life | Approximately 1 year with normal use |
| Dimensions | 150 x 30 x 20 mm |
| Weight | 50 g (including battery) |
| Probe Material | Stainless steel |
| Body Material | Plastic |
| Functions | Temperature reading, data hold, auto power-off, min/max memory |
| Cleaning | Wipe with a damp cloth. Do not immerse in water. Do not use abrasive cleaners. |
| Safety | Keep away from children. Do not use in microwave or oven. Do not expose to direct flame. |
| Included Accessories | Battery, user manual |
| Warranty | 2 years |
Frequently Asked Questions - MT-330 Orava
How do I change the battery in the Orava MT-330 thermometer?
To change the battery, open the battery compartment on the back of the thermometer using a small screwdriver. Remove the old CR2032 battery and insert a new one with the positive (+) side facing up. Close the compartment securely.
Is the Orava MT-330 waterproof?
No, the Orava MT-330 is not waterproof. It is designed for general use and can be cleaned with a damp cloth, but it should not be immersed in water or any liquid. The probe is resistant to moisture but the main unit must be kept dry.
How do I switch between Celsius and Fahrenheit?
To switch between Celsius (°C) and Fahrenheit (°F), press and hold the 'HOLD' button for about 3 seconds until the display changes. The current unit will be shown on the screen.
What is the temperature measurement range of the MT-330?
The MT-330 can measure temperatures from -50°C to +300°C (-58°F to +572°F). It is suitable for a wide range of applications including cooking, refrigeration, and industrial use.
How accurate is the Orava MT-330 thermometer?
The thermometer has an accuracy of ±1°C (±1.8°F) in the range of -20°C to +200°C. Outside this range, accuracy may decrease slightly. For best results, ensure the probe is clean and properly inserted.
How do I calibrate the MT-330?
The MT-330 is factory calibrated and does not require user calibration. If you suspect inaccurate readings, first check the battery and clean the probe. If the problem persists, contact Orava customer support.
Can I use the Orava MT-330 for measuring liquid temperatures?
Yes, the stainless steel probe can be inserted into liquids such as water, oil, or soup. However, do not submerge the entire thermometer only the probe. After use, wipe the probe clean with a damp cloth.
What does the 'HOLD' button do?
The HOLD button freezes the current reading on the display. This is useful when you need to read the temperature after removing the probe from the measured object. Press HOLD again to release.
Why does my thermometer show 'Err' or '---'?
An Err or --- message indicates that the temperature is out of measurement range or the probe is not connected properly. Ensure the probe is fully inserted and the temperature is within -50°C to +300°C.
How should I clean and maintain the Orava MT-330?
Clean the probe and body with a soft damp cloth. Do not use harsh chemicals or abrasive materials. Avoid getting water into the battery compartment. Store the thermometer in a dry place when not in use.
User questions about MT-330 Orava
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermometer in PDF format for free! Find your manual MT-330 - Orava and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MT-330 by Orava.