Tiara III BLTR16-3 - Sewing machine BABY LOCK - Free user manual and instructions
Find the device manual for free Tiara III BLTR16-3 BABY LOCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sewing Machine |
| Brand | Baby Lock |
| Model | Tiara III BLTR16-3 |
| Dimensions (L x W x H) | 16.5 x 7.8 x 12.2 inches |
| Weight | 15.5 lbs |
| Power Consumption | 90 watts |
| Voltage / Frequency | 120V, 60Hz |
| Number of Stitches | 40 |
| Buttonhole Style | 1-step automatic |
| Maximum Sewing Speed | 860 stitches per minute |
| Needle Threader | Automatic |
| Stitch Width | Up to 7 mm |
| Stitch Length | Up to 4 mm |
| Bobbin Type | Drop-in |
| Included Accessories | Presser feet set, needles, bobbins, seam ripper, screwdriver, lint brush |
| Warranty | 25-year limited warranty |
| Sewing Light | LED |
| Free Arm Capability | Yes |
| Foot Control | Yes |
Frequently Asked Questions - Tiara III BLTR16-3 BABY LOCK
How do I thread the Baby Lock Tiara III sewing machine?
To thread the Tiara III, raise the presser foot and turn the handwheel to raise the needle to its highest position. Pass the thread through the thread guides in the sequence indicated on the machine, usually from the spool pin down through the tension discs, then up to the take-up lever, and finally down to the needle. Use the automatic needle threader for easier threading.
How do I wind a bobbin on the Tiara III?
Place an empty bobbin on the bobbin winder spindle. Guide the thread from the spool to the bobbin winder tension disc, then wrap the thread around the bobbin a few times. Push the bobbin winder spindle to the right to engage it, then press the foot control to start winding. The machine will stop automatically when the bobbin is full.
What type of needle does the Tiara III use?
The Tiara III uses standard home sewing machine needles with a flat side. Needle size varies by fabric type, typically 75/11 for light fabrics and 90/14 for medium to heavy fabrics. Always use a new needle for best results.
How do I adjust the stitch length and width?
Use the stitch length dial (usually numbered from 0 to 4) to adjust the length, and the stitch width dial (typically up to 7 mm) to adjust the width. For straight stitches, set width to 0. Consult the manual for recommended settings for different fabrics.
Why is the machine skipping stitches?
Skipped stitches can be caused by a bent or dull needle, incorrect needle size, improper threading, or tension issues. First, replace the needle with a new one. Then rethread the machine, ensuring the thread is properly seated in the tension discs. Check that the bobbin is wound evenly and inserted correctly.
How do I clean and maintain my Baby Lock Tiara III?
Unplug the machine before cleaning. Remove the needle plate and clean the feed dogs and bobbin area with a lint brush (included) to remove dust and thread bits. Apply a drop of sewing machine oil to the specified points after every few hours of use. Refer to the manual for oiling points.
How do I sew a buttonhole on the Tiara III?
Select the 1-step automatic buttonhole stitch. Attach the buttonhole foot, place the button in the holder at the back of the foot, and lower the foot. The machine will automatically sew the buttonhole to the appropriate size. Remember to set the stitch length to the buttonhole setting.
What is the maximum sewing speed of the Tiara III?
The maximum sewing speed is approximately 860 stitches per minute. You can control the speed using the foot control. For beginners, start at a slower speed and increase as you gain confidence.
How do I change the presser foot?
Raise the presser foot lever. Press the presser foot release button at the back of the foot holder to remove the current foot. Align the new foot with the holder and snap it into place. Ensure the foot is securely attached before sewing.
What should I do if the fabric is not feeding?
First, check that the feed dogs are raised (some machines have a drop feed lever). Ensure the presser foot is down and the stitch length is set to a suitable value. If the problem persists, clean the feed dogs as they may be clogged with lint. Also, use the correct needle and thread for the fabric.
User questions about Tiara III BLTR16-3 BABY LOCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual Tiara III BLTR16-3 - BABY LOCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tiara III BLTR16-3 by BABY LOCK.
USER MANUAL Tiara III BLTR16-3 BABY LOCK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BABY LOCK
Model : Tiara III BLTR16-3
Category : Sewing machine