GL-HC-107-90 - Range hood IFB - Free user manual and instructions
Find the device manual for free GL-HC-107-90 IFB in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | IFB |
| Model | GL-HC-107-90 |
| Mounting Type | Wall-mounted |
| Width | 90 cm |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Number of Speeds | 3 |
| Lighting | LED (2 x 1.5 W) |
| Control Type | Electronic Push Button |
| Grease Filter Type | Aluminum Mesh |
| Maximum Airflow | 650 m³/h |
| Noise Level (Max) | 62 dB(A) |
| Installation Height (Min) | 65 cm above cooktop |
| Duct Diameter | 150 mm (recommended) |
| Energy Efficiency Class | A |
| Grease Filter Cleaning | Wash in dishwasher or by hand |
| Replacement Filters | Available as spare parts |
| Warranty | 2 years (standard) |
Frequently Asked Questions - GL-HC-107-90 IFB
How do I install the IFB GL-HC-107-90 range hood?
Ensure a minimum distance of 65 cm from the cooktop. Fix the wall bracket securely using appropriate anchors. Connect the duct to the outlet (150 mm diameter). Electrical connection must be done by a qualified electrician. Refer to the manual for detailed steps.
How often should I clean the filters?
Clean the aluminum mesh filters every 3-4 weeks depending on usage. They can be washed in the dishwasher or by hand with mild detergent. Dry completely before reinstalling.
The range hood is noisy. What can I do?
Check if the filters are clean and properly installed. Ensure the duct is not blocked or kinked. Use the lower speed settings for quieter operation. If noise persists, contact service.
Can I use the hood without ducting (recirculation mode)?
Yes, but you need to purchase a charcoal filter for recirculation mode. Install the charcoal filter in the hood to absorb odors. Follow the manual for installation.
The lights are not working. How to replace them?
The hood uses LED lights (2 x 1.5 W). To replace, disconnect power, remove the light cover, unplug the defective LED, and plug in a new one. Use only genuine IFB parts.
What is the maximum airflow rate?
The maximum airflow is 650 m³/h on the highest speed setting. Actual performance depends on duct length and bends.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3-5 seconds until the indicator light resets. Refer to the manual for exact procedure.
Is the hood suitable for an island kitchen?
This model is designed for wall-mounted installation. For island use, you would need a different model or a ceiling-mounted kit (not included). Consult the manual for compatibility.
What sizes are available?
This specific model GL-HC-107-90 has a width of 90 cm. IFB offers other sizes like 60 cm and 75 cm. Check the product code for exact dimensions.
Where can I find spare parts?
Spare parts such as filters, LEDs, and control boards are available through IFB authorized service centers or online stores. Use the model number GL-HC-107-90 when ordering.
User questions about GL-HC-107-90 IFB
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual GL-HC-107-90 - IFB and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GL-HC-107-90 by IFB.