BPH1306 - Uncategorized Becken - Free user manual and instructions
Find the device manual for free BPH1306 Becken in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Speaker |
| Dimensions (W x H x D) | 180 x 70 x 70 mm |
| Weight | 350 g |
| Power Source | Built-in Li-ion rechargeable battery (3.7V, 2000mAh) |
| Charging Time | Approximately 3 hours via USB-C |
| Playback Time | Up to 12 hours at moderate volume |
| Bluetooth Version | 5.0 |
| Wireless Range | 10 meters (33 ft) |
| Audio Inputs | Bluetooth, AUX (3.5mm), Micro SD card |
| FM Radio | Yes, with built-in antenna |
| Hands-free Calling | Yes, with built-in microphone |
| Water Resistance | IPX5 (splash resistant) |
| Speaker Output | 2 x 10W (stereo) |
| Frequency Response | 80 Hz - 20 kHz |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Included Accessories | USB-C charging cable, AUX cable, user manual |
| Maintenance | Wipe with a dry soft cloth; do not use liquids |
| Safety | Do not expose to extreme temperatures or moisture |
Frequently Asked Questions - BPH1306 Becken
How do I pair the Becken BPH1306 with my phone?
Turn on the speaker by pressing and holding the power button. The Bluetooth indicator will flash. On your phone, enable Bluetooth and select 'Becken BPH1306' from the list. It should connect automatically.
How long does the battery last?
The built-in 2000mAh battery provides up to 12 hours of playback at moderate volume levels. Actual battery life may vary based on volume and usage.
Can I use the speaker while it's charging?
Yes, the speaker supports pass-through charging, so you can listen to music while it's plugged into a power source.
How do I reset the speaker to factory settings?
With the speaker on, press and hold the Volume Up and Power buttons simultaneously for about 5 seconds until the indicator flashes rapidly. This will clear all paired devices.
Is the speaker waterproof?
It has an IPX5 rating, meaning it is splash-resistant but not fully waterproof. Avoid submerging it in water.
How do I use the FM radio function?
Press the Mode button to switch to FM mode. Then press and hold the Play/Pause button to auto-scan and store available stations. Use the Volume Up/Down to navigate presets.
Can I connect two speakers together?
Yes, if your model supports TWS (True Wireless Stereo). Turn on both speakers, then double-press the Mode button on each to pair them. One will act as the left channel and the other as the right.
What should I do if the speaker won't turn on?
Try charging the speaker for at least 2 hours using the included USB-C cable. If it still doesn't turn on, press and hold the power button for 10 seconds to reset the battery management system.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids, solvents, or abrasive cleaners. For the speaker grille, gently brush with a soft-bristled brush.
Can I use the AUX input and Bluetooth simultaneously?
No, the speaker only supports one audio source at a time. If both are connected, the Bluetooth source will take priority. To use AUX, disconnect Bluetooth from your device.
User questions about BPH1306 Becken
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BPH1306 - Becken and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BPH1306 by Becken.
USER MANUAL BPH1306 Becken
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Becken
Model : BPH1306
Category : Uncategorized