DGX-I-DXF-SMS - Uncategorized AMX - Free user manual and instructions
Find the device manual for free DGX-I-DXF-SMS AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Media Matrix Switcher Input/Output Module |
| Model | DGX-I-DXF-SMS |
| Brand | AMX |
| Dimensions (HxWxD) | 1.7 x 17.4 x 10.2 inches (4.3 x 44.2 x 25.9 cm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, 60W max |
| Input Connectors | 1x DXF (Digital XLink Fiber) female |
| Output Connectors | 1x DXF (Digital XLink Fiber) female |
| Control Interface | RS-232, Ethernet (ICSLAN), USB |
| Video Support | Up to 4K60 4:4:4, HDR10 |
| Audio Support | Embedded digital audio up to 7.1 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Relative Humidity | 10% to 90% non-condensing |
| Mounting | Rack-mountable, 1U |
| Front Panel Indicators | Power, Link, Signal LEDs |
| Key Functions | Signal switching, signal extension over fiber |
| Cleaning | Wipe with dry cloth; do not use liquids |
| Safety | Class 1 laser product; avoid direct eye exposure |
| Spare Parts | Power supply unit, fiber optic transceiver module |
| Repairability | Modular design; replaceable modules by qualified personnel |
| Warranty | 3 years limited |
Frequently Asked Questions - DGX-I-DXF-SMS AMX
What is the AMX DGX-I-DXF-SMS used for?
The DGX-I-DXF-SMS is an input/output module for AMX DGX digital media matrix switchers. It transmits video, audio, and control signals over fiber optic cabling using DXF (Digital XLink Fiber) technology.
What cable type is required?
Use single-mode or multi-mode fiber optic cable with ST or LC connectors. The module supports distances up to 1000m (multi-mode) or 10km (single-mode).
Does it support 4K resolution?
Yes, it supports video resolutions up to 4K60 4:4:4 with HDR10, as well as all standard resolutions below.
How do I control the module?
Control is achieved via RS-232, Ethernet (using AMX ICSLAN protocol), or USB. Integrated with AMX NetLinx control systems for automated switching.
Can I connect it directly to a display?
No, the DXF output is designed to connect to another DXF-compatible device, typically the output module of a DGX matrix. It is not a direct video output for displays.
What is the power consumption?
The module consumes 60W max at 100-240 VAC. Power is supplied via the included power supply unit.
Is it hot-pluggable?
Yes, the module supports hot-swapping in DGX matrix frames. However, always follow proper ESD precautions.
How do I clean the fiber optic connectors?
Use lint-free wipes and isopropyl alcohol to gently clean the fiber ends. Avoid touching the ferrules. Use a fiber inspection scope to check for dirt.
What safety precautions should I take?
This product is a Class 1 laser device. Do not look directly into the fiber ports. Disconnect power before servicing. Ensure proper ventilation.
Where can I find the latest firmware?
Firmware updates are available on the AMX support website. Use the AMX NetLinx Studio or Device Discovery tool to update via the Ethernet port.
User questions about DGX-I-DXF-SMS AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DGX-I-DXF-SMS - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGX-I-DXF-SMS by AMX.
USER MANUAL DGX-I-DXF-SMS AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : DGX-I-DXF-SMS
Category : Uncategorized