Punch P110S8 - Subwoofer Rockford Fosgate - Free user manual and instructions
Find the device manual for free Punch P110S8 Rockford Fosgate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Rockford Fosgate |
| Model | Punch P110S8 |
| Size | 10 inches |
| Impedance | 4 ohms (Dual 4 ohm voice coils) |
| RMS Power Handling | 150 Watts |
| Peak Power Handling | 300 Watts |
| Sensitivity | 86 dB |
| Frequency Response | 25 Hz - 250 Hz |
| Mounting Depth | 2.6 inches |
| Cutout Diameter | 9.25 inches |
| Overall Diameter | 10.5 inches |
| Cone Material | Mineral-filled polypropylene |
| Surround Material | Rubber |
| Voice Coil | 1.5-inch dual voice coil |
| Recommended Sealed Enclosure Volume | 0.5 - 0.8 cubic feet |
| Recommended Ported Enclosure Volume | 1.0 - 1.5 cubic feet |
| Net Weight | 8.5 lbs |
| Design Type | Shallow mount |
| Maintenance | Clean with dry cloth; avoid liquids and solvents |
| Safety Warnings | Ensure enclosure is sealed; do not exceed RMS power |
| Warranty | 1 year limited |
| Repairability | Contact Rockford Fosgate authorized service center |
Frequently Asked Questions - Punch P110S8 Rockford Fosgate
What is the RMS power handling of the Rockford Fosgate Punch P110S8?
The RMS power handling is 150 Watts, with a peak of 300 Watts.
How do I wire the dual voice coils?
The subwoofer has dual 4-ohm voice coils. You can wire them in series for 8 ohms or in parallel for 2 ohms, depending on your amplifier's stability.
What size enclosure do I need for this subwoofer?
For a sealed enclosure, use 0.5 to 0.8 cubic feet. For a ported enclosure, use 1.0 to 1.5 cubic feet with a tuning frequency around 35 Hz.
Is this subwoofer a shallow mount design?
Yes, the P110S8 is a shallow mount subwoofer with a mounting depth of only 2.6 inches, making it ideal for tight spaces.
What is the sensitivity rating?
The sensitivity is 86 dB, which is typical for a shallow mount subwoofer.
What is the recommended amplifier power for this subwoofer?
An amplifier delivering 150-200 Watts RMS at the appropriate impedance (2 or 8 ohms) is recommended for optimal performance.
Does the subwoofer require break-in?
Yes, it is recommended to play the subwoofer at moderate volume for 10-20 hours to loosen the suspension and achieve full excursion.
What is the cutout diameter needed for installation?
The required cutout diameter is 9.25 inches. Ensure the mounting hole is clean and free of debris.
What is the cone material?
The cone is made of mineral-filled polypropylene for stiffness and durability, with a rubber surround for longevity.
Can I use this subwoofer in a sealed enclosure?
Yes, the P110S8 works well in sealed enclosures of 0.5-0.8 cubic feet, providing tight and accurate bass.
User questions about Punch P110S8 Rockford Fosgate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Punch P110S8 - Rockford Fosgate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Punch P110S8 by Rockford Fosgate.
USER MANUAL Punch P110S8 Rockford Fosgate
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rockford Fosgate
Model : Punch P110S8
Category : Subwoofer