Prime R1-2X12 - Subwoofer Rockford Fosgate - Free user manual and instructions
Find the device manual for free Prime R1-2X12 Rockford Fosgate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Rockford Fosgate |
| Model | Prime R1-2X12 |
| Category | Subwoofer |
| Speaker Size | 12 inches |
| Configuration | Dual 12-inch subwoofer system |
| Peak Power Handling | 800 Watts |
| RMS Power Handling | 400 Watts |
| Impedance | Dual 2-ohm voice coils |
| Frequency Response | 30 Hz - 250 Hz |
| Sensitivity | 86 dB |
| Mounting Cut-Out Diameter | 11.5 inches |
| Mounting Depth | 5.6 inches |
| Recommended Sealed Enclosure Volume | 1.1 cu ft per subwoofer |
| Recommended Ported Enclosure Volume | 1.4 cu ft per subwoofer |
| Cone Material | Polypropylene with Diamond weave |
| Surround Material | High-roll foam |
| Voice Coil Technology | Dual voice coil with high-temperature adhesive |
| Safety Features | Thermal protection circuit and vented pole piece |
| Cleaning and Maintenance | Use a soft dry cloth; avoid liquids and abrasive cleaners |
| Spare Parts and Repairability | Serviceable through Rockford Fosgate authorized dealers |
| Package Contents | 2 subwoofers and installation manual |
Frequently Asked Questions - Prime R1-2X12 Rockford Fosgate
What is the power handling of the Rockford Fosgate Prime R1-2X12?
The Prime R1-2X12 has an RMS power handling of 400 Watts and a peak power handling of 800 Watts. It is recommended to use an amplifier that delivers 200-400 Watts RMS per subwoofer to ensure optimal performance and longevity.
What is the impedance of the Prime R1-2X12 subwoofer?
The subwoofer features dual 2-ohm voice coils, allowing flexible wiring configurations. You can wire the coils in series or parallel to achieve a 4-ohm or 1-ohm load, depending on your amplifier's capabilities.
How should I break in my new Rockford Fosgate subwoofer?
To properly break in your subwoofer, play music at moderate volume (30-50% of max) for the first 20-30 hours. Gradually increase the volume over time. This helps the surround and spider to loosen up while improving overall bass response.
What amplifier should I use for the Prime R1-2X12?
Choose a mono amp that can deliver between 400 and 800 Watts RMS at the final impedance you wire. A quality class-D mono amplifier from Rockford Fosgate is ideal for driving this subwoofer system with reliability and clean power.
What is the recommended enclosure for the R1-2X12?
For a sealed enclosure, use 1.1 cu ft per subwoofer. For a ported enclosure, use 1.4 cu ft per subwoofer with a tuning frequency of 35 Hz. Proper enclosure specs are critical for maximizing output and preventing cone damage.
How do I wire the dual voice coils on this subwoofer?
The dual 2-ohm voice coils can be wired in series for a 4-ohm load or in parallel for a 1-ohm load. If you have two subwoofers, you can further combine them. Always verify your amplifier's stable impedance rating before wiring.
How should I clean and maintain my subwoofer?
Use a soft, dry microfiber cloth to gently remove dust from the cone and surround. Do not use water, glass cleaners, or solvents, as they can damage the foam surround and cone material. Regular dusting helps maintain sound quality.
My subwoofer makes a rattling sound. What should I check?
First check the mounting screws and ensure the subwoofer is properly sealed in the enclosure. Then inspect the surround for tears and the voice coil for damage. If the issue persists, it may be an air leak or blown voice coil requiring service.
Can I install the Prime R1-2X12 in a hatchback car?
Yes, the subwoofer can be installed in most vehicles. Ensure the enclosure fits in your cargo area and that it is securely fastened. For hatchbacks, use a lift-off or rear-facing orientation to optimize low-frequency output.
What is the frequency response of this subwoofer?
The Prime R1-2X12 reproduces frequencies from 30 Hz to 250 Hz, making it ideal for deep bass extension. The high-frequency roll-off is optimized for subwoofer duties, allowing to pair with component speakers smoothly.
User questions about Prime R1-2X12 Rockford Fosgate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Prime R1-2X12 - Rockford Fosgate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Prime R1-2X12 by Rockford Fosgate.
USER MANUAL Prime R1-2X12 Rockford Fosgate
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rockford Fosgate
Model : Prime R1-2X12
Category : Subwoofer