F-PXL45M - Air purifier PANASONIC - Free user manual and instructions
Find the device manual for free F-PXL45M PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Brand | Panasonic |
| Model | F-PXL45M |
| Dimensions (W x D x H) | Approx. 36 x 20 x 50 cm |
| Weight | Approx. 5.2 kg |
| Power Supply | AC 220-240V, 50/60Hz |
| Power Consumption | Approx. 45 W (max) |
| Coverage Area | Approx. 25 m² |
| Filtration System | Pre-filter, HEPA filter, Activated carbon filter |
| HEPA Filter Type | True HEPA (H13 class) |
| Fan Speeds | 3 speeds (Low, Medium, High) + Auto mode |
| Airflow Rate (CADR) | Approx. 200 m³/h |
| Noise Level | 20 - 48 dB(A) |
| Additional Features | Nanoe ion generator, Timer (1-8 hours), Sleep mode |
| Filter Replacement Indicator | Yes |
| Maintenance | Clean pre-filter every 2 weeks; replace HEPA and carbon filters every 2 years |
| Safety Features | Overheat protection, auto shut-off when cover opened |
| Accessories Included | User manual, AC adapter |
| Repairability | Filters and fan motor replaceable; contact Panasonic service |
Frequently Asked Questions - F-PXL45M PANASONIC
How often should I replace the filters?
The pre-filter should be cleaned every 2 weeks. The HEPA filter and activated carbon filter should be replaced every 2 years under normal use. The filter replacement indicator will alert you when it's time.
Can I wash the HEPA filter?
No, the HEPA filter is not washable. It should be replaced when dirty. Only the pre-filter can be vacuumed or washed with water.
What is the coverage area for this purifier?
The F-PXL45M is designed for rooms up to approximately 25 m² (270 sq ft). For larger rooms, performance may be reduced.
How do I clean the pre-filter?
Remove the front panel and take out the pre-filter. Vacuum it or rinse with water. Let it dry completely before reinserting.
Is the Nanoe technology safe?
Yes, Panasonic Nanoe technology generates microscopic hydroxyl radicals that inhibit pollutants. It is safe for continuous use and does not produce harmful ozone.
Why is the filter replacement light blinking?
The blinking light indicates that the filters need to be checked or replaced. After replacing, reset the indicator by pressing the reset button (usually behind the front cover) for 3 seconds.
Can I use the purifier 24/7?
Yes, the purifier is designed for continuous operation. However, for energy savings, you can use the timer or auto mode to adjust fan speed based on air quality.
What does the auto mode do?
In auto mode, the built-in air quality sensor detects particulate matter and adjusts the fan speed automatically to maintain clean air.
How do I reset the filter timer?
After installing new filters, press and hold the Filter Reset button (usually located near the filter compartment) for about 3 seconds until the indicator turns off.
Where can I buy replacement filters?
Replacement filters (model F-PXL45M-F or similar) are available from Panasonic authorized dealers, online retailers, or through the Panasonic support website.
User questions about F-PXL45M PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual F-PXL45M - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F-PXL45M by PANASONIC.
USER MANUAL F-PXL45M PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : F-PXL45M
Category : Air purifier