EVS5136S - Server Dahua Technology - Free user manual and instructions
Find the device manual for free EVS5136S Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) Server |
| Model | EVS5136S |
| Brand | Dahua Technology |
| Channels | 36 channels |
| Compression | H.265, H.264, MJPEG |
| Hard Drive Support | Up to 2 SATA HDDs (each up to 10TB) |
| Recording Resolution | Up to 12MP |
| Dimensions (W x D x H) | 375 mm x 325 mm x 53 mm |
| Weight | 3.5 kg (without HDDs) |
| Power Supply | DC 12V, 5A (external adapter) |
| Power Consumption | ≤ 15W (without HDDs) |
| Network Interface | 1x 10/100/1000 Mbps Ethernet |
| USB Ports | 2x USB 2.0, 1x USB 3.0 |
| Audio I/O | 1x RCA input, 1x RCA output |
| Alarm I/O | 4x alarm input, 1x alarm output |
| Operating Temperature | -10°C to +55°C |
| Maintenance | Keep ventilated; clean dust with dry cloth; avoid moisture. |
| Safety | Use only supplied power adapter; do not disassemble; keep away from children. |
| Spare Parts & Repairability | Contact authorized service center; no user-serviceable parts inside. |
| General Information | Supports remote access via web browser or DMSS app. |
Frequently Asked Questions - EVS5136S Dahua Technology
How do I access the EVS5136S remotely?
Ensure the NVR is connected to the internet. Use the DMSS app or web browser with the device's IP address. You may need to configure port forwarding on your router.
What hard drives are compatible?
The EVS5136S supports SATA hard drives up to 10TB each. For best performance, use surveillance-grade drives such as WD Purple or Seagate SkyHawk.
How can I reset the NVR to factory defaults?
Press and hold the Reset button on the rear panel for about 10 seconds until you hear a beep. The device will reboot with default settings.
What is the maximum recording resolution?
The NVR supports recording at up to 12MP resolution, depending on the cameras connected. Ensure your cameras are compatible.
Why is my NVR not detecting cameras?
Check that cameras are connected to the same network. Go to Camera Management and use Search or manually add IP addresses. Also verify camera credentials.
Can I use PoE cameras?
The EVS5136S does not have built-in PoE ports. You need a separate PoE switch or injector to power cameras.
How do I update the firmware?
Download the latest firmware from the Dahua website. Log into the NVR, go to System > Update, and select the firmware file. Do not power off during update.
What are the login credentials by default?
Default username is admin and password is blank or admin. For security, change the password upon first login.
How many cameras can I connect?
The EVS5136S supports up to 36 IP cameras. Ensure your network bandwidth and storage capacity are sufficient.
Does the NVR support audio recording?
Yes, if the cameras have audio input. The NVR has two RCA audio ports for line-in and line-out. Audio settings can be enabled per channel.
User questions about EVS5136S Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual EVS5136S - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVS5136S by Dahua Technology.
USER MANUAL EVS5136S Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : EVS5136S
Category : Server