HW65-IM10919 - Washing machine HAIER - Free user manual and instructions
Find the device manual for free HW65-IM10919 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Haier |
| Model | HW65-IM10919 |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 58 cm |
| Weight | 72 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Capacity | 6.5 kg |
| Maximum Spin Speed | 1000 rpm |
| Programs | Cotton, Synthetics, Delicates, Quick, Rinse & Spin, Drum Clean |
| Energy Efficiency Class | A++ |
| Noise Level (Wash) | 58 dB |
| Noise Level (Spin) | 76 dB |
| Water Consumption per Cycle | 45 L |
| Annual Energy Consumption | 170 kWh |
| Functions | Delay Start, Child Lock, Quick Wash, Extra Rinse |
| Care & Cleaning | Clean detergent drawer regularly; clean pump filter monthly; descale every 3 months |
| Safety Features | Child lock, overflow protection, unbalanced load detection |
| Spare Parts Availability | Spare parts available for 10 years after production (door seal, belt, pump, etc.) |
Frequently Asked Questions - HW65-IM10919 HAIER
How do I install the washing machine?
Remove all packaging and transit bolts. Place on a level floor. Connect water hoses and power supply. Ensure the drain hose is properly connected to a siphon or standpipe. Run a drum clean cycle before first use.
What does the error code E1 mean?
Error code E1 indicates a water supply issue. Check that the water tap is open and the inlet hose is not kinked. Clean the inlet filter and ensure water pressure is adequate.
How do I clean the detergent drawer?
Remove the drawer by pressing the release lever. Wash it with warm water and a soft brush. Dry thoroughly before reinserting.
How do I use the delay start function?
Select a program and press the 'Delay' button repeatedly to set the desired delay time (e.g., 3h). Press 'Start/Pause' to begin. The machine will start after the set delay.
What is the maximum load for a cotton wash?
For a cotton program, the maximum load is 6.5 kg. Overloading may cause poor cleaning and unbalanced spin. Refer to the program table for other fabrics.
How do I clean the pump filter?
Unplug the machine. Open the lower cover, place a bowl underneath, and unscrew the filter cap. Remove any debris. Clean and reinstall. Ensure it is tight to avoid leaks.
Why is the machine not spinning?
Possible reasons: unbalanced load, drain blocked, or spin speed too low. Distribute clothes evenly, clean the pump filter, or select a higher spin speed.
How do I enable child lock?
Press and hold the 'Child Lock' button for 3 seconds until the lock icon appears. To disable, press and hold again. This prevents children from changing settings.
What should I do if the machine leaks?
Check water inlet connections, drain hose, and door seal for damage. Tighten or replace as needed. If leak persists, contact service.
How do I descale the washing machine?
Use a descaler or run a hot water cycle with vinegar (empty drum). Alternatively, use the 'Drum Clean' program with a cleaner. Repeat every 3 months in hard water areas.
User questions about HW65-IM10919 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual HW65-IM10919 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HW65-IM10919 by HAIER.
USER MANUAL HW65-IM10919 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : HW65-IM10919
Category : Washing machine