LHA9120WGAB0 - Washing machine HAIER - Free user manual and instructions
Find the device manual for free LHA9120WGAB0 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Haier |
| Model | LHA9120WGAB0 |
| Product Type | Front-load washing machine |
| Installation Type | Freestanding |
| Capacity | 9 kg |
| Maximum Spin Speed | 1200 rpm |
| Adjustable Spin Speed | Yes |
| Width | 596 mm |
| Height | 850 mm |
| Depth | 540 mm |
| Weight | 72 kg |
| Energy Efficiency Class | A+++ |
| Water Consumption per Cycle | 45 L |
| Annual Energy Consumption | 151 kWh |
| Noise Level Washing | 56 dB |
| Noise Level Spinning | 74 dB |
| Motor Type | Inverter Direct Drive |
| Drum Material | Stainless steel |
| Display | LED |
| Number of Programs | 15 |
| Delayed Start | Up to 24 hours |
| Child Lock | Yes |
| Water Protection | AquaStop |
| Foam Control | Yes |
| Unbalanced Load Detection | Yes |
| Power Supply | 220-240 V, 50 Hz |
Frequently Asked Questions - LHA9120WGAB0 HAIER
What is the maximum load capacity of the Haier LHA9120WGAB0?
The machine has a 9 kg load capacity for cotton. For smaller loads, use the load sensor to adjust.
How do I clean the detergent drawer?
Remove the drawer by pressing the release lever. Rinse under warm water and use a brush to remove residue. Clean the recess with a damp cloth.
Why is my washing machine not spinning?
Check if the load is unbalanced, the drain pump filter is clogged, or the safety lock is active. Ensure the machine is leveled. If error code E2 appears, the drain hose may be obstructed.
How do I activate the child lock?
Press and hold the Rinse Hold and Spin buttons for 3 seconds until the key symbol lights up. To deactivate, repeat.
What are the installation requirements?
The machine requires a water supply with 3/4 inch connection, a drain hose, and a 220-240 V power outlet. Leave at least 2 cm for ventilation. Use the provided transport bolts removal wrench.
How often should I clean the drain pump filter?
Clean the filter every 2 months or when the error code E3 appears. Turn off the machine, unplug, open the door flap, and unscrew the filter.
What does error code E1 mean?
E1 indicates a water supply problem. Check if the tap is open and the inlet hose is not kinked. Ensure the water pressure is adequate.
Can I use liquid detergent with the quick wash program?
Yes, but for quick programs use less detergent. Always use the main dispenser compartment as the machine will not have a prewash phase.
How do I properly maintain the door seal?
After each wash, wipe the door seal dry to prevent mold. Clean the seal with a damp cloth and check for foreign objects.
What should I do if the machine vibrates excessively?
Ensure the transport bolts are removed, the machine is level, and the floor is stable. Adjust the feet and retighten the lock nuts.
User questions about LHA9120WGAB0 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual LHA9120WGAB0 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LHA9120WGAB0 by HAIER.
USER MANUAL LHA9120WGAB0 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : LHA9120WGAB0
Category : Washing machine