35TG - Outboard motor Flover - Free user manual and instructions
Find the device manual for free 35TG Flover in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Outboard motor |
| Brand | Flover |
| Model | 35TG |
| Power Output | 35 HP |
| Displacement | 521 cc |
| Cylinders | 2 |
| Starting System | Manual / Electric |
| Fuel Type | Gasoline |
| Fuel Tank Capacity | 24 L |
| Oil System | Pre-mixed 50:1 |
| Weight | 78 kg |
| Dimensions (L x W x H) | 90 cm x 40 cm x 130 cm |
| Shaft Length | Long shaft (508 mm) |
| Gear Ratio | 2.15:1 |
| Propeller Pitch | 11 inch |
| Steering | Tiller / Remote |
| Cooling System | Water cooled |
| Ignition System | CDI |
| Recommended Oil | TC-W3 |
| Maintenance Interval | Every 100 hours or annually |
| Safety Features | Emergency stop switch, kill cord |
| Warranty | 2 years |
Frequently Asked Questions - 35TG Flover
What fuel-to-oil ratio should I use for the Flover 35TG?
Use a 50:1 ratio of gasoline to TC-W3 outboard oil. Mix thoroughly before adding to the fuel tank.
How do I start the Flover 35TG outboard motor?
Ensure the kill cord is attached, fuel valve is open, choke is engaged if cold, then pull the starter rope or turn the electric start key.
What type of oil does the Flover 35TG require?
Use NMMA-certified TC-W3 outboard oil for both pre-mix and injection systems.
How often should I change the gear oil?
Change the gear oil after the first 20 hours of break-in, then every 100 hours or annually.
What is the correct way to flush the motor after use in saltwater?
Attach flushing muffs to the water intake, run the engine at idle in fresh water for 10-15 minutes to remove salt deposits.
Why won't my Flover 35TG start?
Check fuel supply, spark plugs, kill cord connection, and battery (if electric start). Ensure the choke is used properly.
How do I store the outboard motor for winter?
Stabilize fuel, fog the engine with oil, change gear oil, grease fittings, and store upright in a dry place.
What propeller size fits the Flover 35TG?
Commonly a 10-11 inch pitch, 3-blade aluminum propeller. Check your manual for exact specifications.
How do I adjust the trim on the Flover 35TG?
Use the trim adjustment knob or tilt mechanism to angle the motor for optimal performance based on boat load and water conditions.
Where can I find replacement parts for the Flover 35TG?
Contact Flover authorized dealers or online marine parts retailers using your model number 35TG.
User questions about 35TG Flover
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Outboard motor in PDF format for free! Find your manual 35TG - Flover and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 35TG by Flover.
USER MANUAL 35TG Flover
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Flover
Model : 35TG
Category : Outboard motor