DSL 30N - Water heater Gleamous - Free user manual and instructions
Find the device manual for free DSL 30N Gleamous in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | DSL 30N |
| Brand | Gleamous |
| Capacity | 30 Liters |
| Power Rating | 2000 W |
| Voltage | 220-240 V / 50 Hz |
| Energy Efficiency Class | A |
| Max Water Temperature | 75 °C |
| Temperature Range | 30-75 °C |
| Material | Enameled Steel Tank |
| Heating Element | Copper Immersion |
| Safety Features | Overheat Protection, Safety Valve, Thermostat |
| Installation Type | Wall Mounted |
| Water Connection | 1/2" BSP |
| Weight (without water) | 15 kg |
| Dimensions (HxWxD) | 800 x 400 x 400 mm |
| Insulation Thickness | 50 mm |
| Warranty | 2 Years (tank and parts) |
| Maintenance | Annual Descaling Recommended |
| Included Accessories | Safety Valve, Mounting Bracket, User Manual |
Frequently Asked Questions - DSL 30N Gleamous
How do I adjust the water temperature on the Gleamous DSL 30N?
Use the thermostat dial on the front of the unit. Turn clockwise to increase temperature up to 75°C, counterclockwise to decrease. Wait 10 minutes for stabilization.
What is the recommended maintenance for the DSL 30N water heater?
Descaling every 1-2 years depending on water hardness. Drain the tank, remove the heating element, and soak in vinegar or commercial descaler. Replace the anode rod every 3-5 years.
Can the DSL 30N be installed outdoors?
No, it is designed for indoor installation only (IP24 rated). Avoid exposure to rain, frost, or direct sunlight.
Why does my DSL 30N make a popping noise?
Popping is usually caused by mineral deposits on the heating element. Perform descaling to reduce noise. If persists, check for sediment in the tank.
How long does it take to heat 30 liters of water?
Approximately 45-60 minutes for a full tank from cold (15°C to 65°C) at 2000W power.
What safety features does the DSL 30N have?
It includes overheat protection, a temperature and pressure relief valve, and a thermostatic control to prevent boiling.
Is the Gleamous DSL 30N energy efficient?
Yes, with energy class A and 50 mm thick polyurethane foam insulation, it minimizes heat loss, saving electricity.
What do I do if the water heater does not heat?
Check the circuit breaker and reset button. If the thermostat is faulty, replace it. Ensure the heating element is not burnt out. Contact a qualified technician.
Can I install the DSL 30N horizontally?
No, it must be installed vertically with the inlet/outlet facing down to ensure proper circulation and safety valve operation.
Where can I find spare parts for the DSL 30N?
Authorized Gleamous dealers or online stores. Common parts include heating elements, thermostats, and anode rods. Use genuine parts for warranty validity.
User questions about DSL 30N Gleamous
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual DSL 30N - Gleamous and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSL 30N by Gleamous.
USER MANUAL DSL 30N Gleamous
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Gleamous
Model : DSL 30N
Category : Water heater