DT-2 - Label printer Tor Rey - Free user manual and instructions
Find the device manual for free DT-2 Tor Rey in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Label Printer |
| Brand | Tor Rey |
| Model | DT-2 |
| Print Technology | Direct Thermal |
| Print Resolution | 203 dpi |
| Print Speed | Up to 4 ips (102 mm/s) |
| Max Print Width | 108 mm (4.25 inches) |
| Dimensions (L x W x H) | 200 x 170 x 160 mm |
| Weight | 1.8 kg |
| Power Supply | AC 100-240V, 50/60Hz, DC 24V 2.5A |
| Connectivity | USB 2.0, RS-232 (optional) |
| Supported Media Types | Labels, tags, receipts (continuous, die-cut, fanfold) |
| Max Media Width | 118 mm |
| Max Media Roll Diameter | 127 mm (5 inches) OD |
| Ribbon (optional) | Not required (direct thermal) or wax/resin for thermal transfer |
| Display | 1-line LCD with backlight |
| Buttons | Power, Feed, Pause |
| Software Compatibility | Windows, label design software included |
| Languages | Multiple (English, French, etc.) |
| Warranty | 1 year limited warranty |
| Maintenance | Clean print head with isopropyl alcohol; wipe platen roller regularly |
| Safety | CE, FCC, RoHS compliant |
| Spare Parts | Print head, platen roller, power adapter available |
| Repairability | Modular design; user-replaceable print head and roller |
Frequently Asked Questions - DT-2 Tor Rey
How to load labels into the DT-2 printer?
Open the top cover, place the label roll on the spindle, feed the labels through the guides and under the printhead, close the cover, and power on.
My DT-2 is not printing. What should I check?
Ensure the printer is powered on, the USB cable is connected, the label roll is properly loaded, and the print head is clean. Also check the driver installation.
How to clean the print head?
Turn off the printer, open the cover, and gently wipe the print head with a cotton swab moistened with isopropyl alcohol. Allow it to dry before using.
What software can I use with the DT-2?
The printer works with Windows and includes label design software. It is compatible with barcode software like BarTender or NiceLabel.
Does the DT-2 support thermal transfer printing?
Yes, the DT-2 can also use thermal transfer with an optional ribbon mechanism. Direct thermal does not require ribbon.
What is the maximum label length?
The printer supports continuous labels up to 50 inches (1270 mm) per label.
Why are my labels smudging?
Smudging may occur if the print head is dirty or the labels are thermal paper with low heat resistance. Clean the print head and use recommended media.
Can I print on synthetic labels?
Yes, the DT-2 can print on polyester and polypropylene labels when using thermal transfer with appropriate ribbon.
How to adjust the label sensor?
The printer has an adjustable sensor. Use the gap/black mark sensor calibration in the software or manual feed button to set the label position.
What should I do if the printer jams?
Turn off the printer, open the cover, remove the jammed label carefully, check for debris, and reload the labels. Ensure the platen roller is clean.
User questions about DT-2 Tor Rey
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Label printer in PDF format for free! Find your manual DT-2 - Tor Rey and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DT-2 by Tor Rey.
USER MANUAL DT-2 Tor Rey
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tor Rey
Model : DT-2
Category : Label printer