KA3001 - Battery KRESS - Free user manual and instructions
Find the device manual for free KA3001 KRESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Pack |
| Model | KA3001 |
| Brand | Kress |
| Battery Chemistry | Lithium-Ion (Li-Ion) |
| Voltage | 20V Max (18V nominal) |
| Capacity | 2.0 Ah |
| Energy | 40 Wh |
| Weight | 0.5 kg (1.1 lbs) |
| Dimensions (H x W x D) | 120 x 80 x 60 mm (4.7 x 3.1 x 2.4 in) |
| Charging Time (with compatible charger) | Approximately 1 hour |
| Compatibility | Kress 20V cordless power tools and chargers |
| Battery Level Indicator | LED indicator with 4 lights |
| Overload Protection | Yes |
| Overheat Protection | Yes (thermal cutoff) |
| Deep Discharge Protection | Yes |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Storage Temperature | 0°C to 40°C (32°F to 104°F) |
| Maintenance | Keep contacts clean; store in cool, dry place; charge every 6 months |
| Disposal | Recycle according to local regulations for Li-Ion batteries |
Frequently Asked Questions - KA3001 KRESS
How do I charge the Kress KA3001 battery?
Use a compatible Kress 20V charger. Insert the battery into the charger until it clicks. The charger LED will indicate charging status. A full charge takes approximately 1 hour.
Which Kress tools are compatible with this battery?
The KA3001 works with all Kress 20V Max (18V nominal) cordless tools, including drills, saws, and impact drivers.
How should I store the battery when not in use?
Store in a cool, dry place away from direct sunlight and extreme temperatures. Ideally, keep the battery at 40-60% charge for long-term storage.
What does the LED indicator on the battery mean?
The battery has a 4-LED gauge. Press the button: 4 lights = fully charged; 3 = 75%; 2 = 50%; 1 = 25%; flashing = low battery. Charge immediately if flashing.
Can I use this battery in cold weather?
Yes, but performance may be reduced. The operating range is -20°C to 50°C. For best results, warm the battery to room temperature before use.
How do I clean the battery contacts?
Wipe contacts with a dry cloth. Do not use solvents or water. Ensure contacts are free of dirt and corrosion before charging.
What safety features does the KA3001 have?
It includes overload protection, over-temperature cutoff, and deep discharge prevention to extend battery life and ensure safe operation.
How long does the battery last per charge?
Run time depends on the tool and workload. For a typical drill, you can expect 30-60 minutes of continuous use with a 2.0 Ah battery.
How should I dispose of a dead KA3001 battery?
Do not throw in trash. Recycle at a designated battery collection point or follow local regulations for Li-Ion battery disposal.
The battery won't charge. What should I do?
Check the charger is plugged in and compatible. Ensure battery contacts are clean. If the battery is too hot or cold, let it reach room temperature. If still not charging, the battery may be defective; contact Kress support.
User questions about KA3001 KRESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery in PDF format for free! Find your manual KA3001 - KRESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KA3001 by KRESS.
USER MANUAL KA3001 KRESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KRESS
Model : KA3001
Category : Battery