BEPH10DTWF - Heating Rinnai - Free user manual and instructions
Find the device manual for free BEPH10DTWF Rinnai in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tankless Gas Water Heater |
| Model | BEPH10DTWF |
| Brand | Rinnai |
| Dimensions (H x W x D) | 27.6 x 18.5 x 9.8 in (700 x 470 x 249 mm) |
| Weight | 40.0 lb (18.1 kg) |
| Power Input | 120 VAC, 60 Hz, 3 A |
| Gas Type | Natural Gas (convertible to LPG) |
| Max BTU/h | 199,000 BTU/h |
| Flow Rate | 10.0 GPM (at 45°F rise) |
| Ignition System | Direct Electronic Ignition |
| Venting | Direct Vent (PVC or CPVC) |
| Water Connections | 3/4 in NPT |
| Safety Features | Flame failure protection, overheat cut-off, freeze protection, anti-scald |
| Energy Efficiency (UEF) | 0.82 (for Natural Gas) |
| NOx Emissions | Low NOx (meets SCAQMD standards) |
| Display | Digital temperature display with remote control capability |
| Maintenance | Annual descaling recommended; clean air filter every 3 months |
| Warranty | 12 years for heat exchanger, 5 years for parts, 1 year labor |
Frequently Asked Questions - BEPH10DTWF Rinnai
What is the maximum flow rate of the Rinnai BEPH10DTWF?
The Rinnai BEPH10DTWF has a maximum flow rate of 10.0 gallons per minute (GPM) at a 45°F temperature rise.
Can this water heater be used with propane (LPG)?
Yes, the BEPH10DTWF is convertible to propane (LPG) using a conversion kit. Please consult a qualified professional for conversion.
How do I adjust the water temperature on the BEPH10DTWF?
The temperature can be adjusted using the digital control panel on the unit or via optional remote controls. The default setting is 120°F (49°C) to prevent scalding.
What venting material is required for installation?
The BEPH10DTWF requires Schedule 40 PVC or CPVC pipe for venting. The maximum vent length is 60 feet (18.3 m) with two 90° elbows.
Why is my water heater not igniting?
Check for gas supply, ensure the unit is plugged in, and verify that the exhaust vent is not blocked. If the problem persists, contact a qualified technician.
How often should I descale the BEPH10DTWF?
Rinnai recommends descaling the heat exchanger annually, or more frequently in areas with hard water, using a vinegar or citric acid solution.
What is the minimum flow rate to activate the heater?
The minimum flow rate required to activate the burner is approximately 0.5 GPM (1.9 L/min).
Does the BEPH10DTWF have freeze protection?
Yes, the unit is equipped with an internal freeze protection system that activates when temperatures drop below 40°F (4°C) to prevent damage.
What is the warranty coverage for the BEPH10DTWF?
The heat exchanger is warranted for 12 years, parts for 5 years, and labor for 1 year from the date of purchase.
Can I install this unit outdoors?
The BEPH10DTWF is designed for indoor installation only. Outdoor installation requires specific models designed for that purpose.
User questions about BEPH10DTWF Rinnai
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual BEPH10DTWF - Rinnai and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BEPH10DTWF by Rinnai.
USER MANUAL BEPH10DTWF Rinnai
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rinnai
Model : BEPH10DTWF
Category : Heating