ANT-9018 - TV antenna Steren - Free user manual and instructions
Find the device manual for free ANT-9018 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Antenna |
| Brand | Steren |
| Model | ANT-9018 |
| Dimensions | 30 cm x 20 cm x 5 cm |
| Weight | 200 g |
| Frequency Range | VHF (174-230 MHz) & UHF (470-862 MHz) |
| Impedance | 75 Ohm |
| Connector | F-type coaxial |
| Polarization | Linear |
| Installation | Indoor/Outdoor use, wall or table mount |
| Cable Length | 1.5 m |
| Power Supply | Passive (no amplifier) |
| Functions | Receives digital terrestrial TV (DVB-T/T2) |
| Maintenance | Wipe clean with a soft, dry cloth |
| Safety | Do not expose to rain or moisture; keep away from heat sources |
| Spare Parts | Not user-replaceable |
| General Information | Designed for clear reception of digital TV signals |
Frequently Asked Questions - ANT-9018 Steren
What does the ANT-9018 TV antenna support?
It supports reception of digital terrestrial TV broadcasts (DVB-T/T2) in both VHF and UHF bands.
Can I use this antenna outdoors?
Yes, the ANT-9018 can be used both indoors and outdoors, but ensure it is properly mounted and protected from direct exposure to rain or moisture.
Does it require an amplifier?
No, the ANT-9018 is a passive antenna and does not require external power or an amplifier for normal reception in strong signal areas.
What type of coaxial cable does it use?
It uses a standard F-type connector and comes with a 1.5 m cable.
How do I improve reception?
Try repositioning the antenna to face the nearest broadcast tower, elevate it, or avoid obstacles like walls and metal objects.
Is it compatible with all TV models?
Yes, as long as your TV has a coaxial input (typically labeled ANT IN or RF IN) and supports DVB-T/T2.
Does it support 4K TV signals?
The antenna can receive HDTV signals, including 1080i and 720p; 4K reception depends on broadcast standards in your area.
How do I clean the antenna?
Unplug the antenna and clean it with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
What should I do if I receive no channels?
Check that the antenna is properly connected to the TV, run a channel scan, and try moving the antenna to a different location or orientation.
Can I replace the cable?
The cable is fixed; however, you can use a coaxial extension cable with an F-type coupler if needed.
User questions about ANT-9018 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV antenna in PDF format for free! Find your manual ANT-9018 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANT-9018 by Steren.
USER MANUAL ANT-9018 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : ANT-9018
Category : TV antenna