VCW-2002B - Vacuum Cleaner Vivax - Free user manual and instructions
Find the device manual for free VCW-2002B Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Canister Vacuum Cleaner |
| Model | VCW-2002B |
| Brand | Vivax |
| Power Consumption | 2000 W |
| Dust Capacity | 2.5 L |
| Filtration | HEPA 13 |
| Noise Level | 78 dB |
| Cord Length | 8 m |
| Weight | 5.2 kg |
| Dimensions (WxDxH) | 350 x 250 x 300 mm |
| Voltage | 220-240 V, 50/60 Hz |
| Cleaning Radius | 10 m |
| Bagless | Yes |
| Automatic Cord Rewind | Yes |
| Variable Speed Control | No |
| Floor Types | Hard floors, carpets |
| Accessories Included | Crevice tool, brush, upholstery tool |
| Filter Washable | Yes |
| Maintenance | Clean filter regularly, empty dust cup after each use |
| Safety Features | Overheat protection, automatic shut-off |
| Repairability | Spare parts available online |
Frequently Asked Questions - VCW-2002B Vivax
How do I clean the filter?
To clean the filter, remove it from the vacuum and tap gently to remove loose dust. For deeper cleaning, wash it under running water (max 40°C) and let it dry completely for 24 hours before reinstalling. Do not use detergent or brush the filter.
How do I empty the dust cup?
Press the button to release the dust cup from the main body. Hold it over a trash bin, then press the bottom release latch to empty the contents. For hygiene, empty after each use and wash the cup occasionally with mild soap.
Why is the suction weak?
Weak suction is often caused by a clogged filter or full dust cup. Check and clean the filter, empty the dust cup. Also inspect the hose and nozzle for blockages. If the issue persists, the belt may need replacement.
How do I replace the belt?
First, unplug the vacuum. Remove the bottom plate and the brush roller. Slip the old belt off and replace it with a new one (refer to model number). Reassemble the roller and bottom plate. Ensure the belt is not twisted.
What does the indicator light mean?
The indicator light turns red when the dust cup is full or the filter needs cleaning. Check and clean the components to restore normal operation. If the light stays on after cleaning, a blockage may exist.
Can I use the vacuum on hardwood floors?
Yes, this vacuum is safe for hardwood floors when used with the appropriate setting or attachment. Use the brush tool for gentle cleaning and avoid using the power brush on delicate surfaces without approval.
How often should I replace the filter?
The filter should be replaced every 6 to 12 months depending on usage. Washable filters can be cleaned, but eventually lose efficiency. Replace sooner if you notice reduced suction or odor.
The vacuum overheats and shuts off - what to do?
The vacuum has overheat protection. Turn off and unplug it. Check for blockages in the hose, dust cup, or filter. Clean them and allow the vacuum to cool for at least 30 minutes before restarting. If it happens frequently, contact support.
How do I unblock the hose?
Disconnect the hose from the vacuum and use a long, flexible object (e.g., a broom handle) to gently push out the blockage. You can also run water through the hose if it's removable. Ensure the hose is completely dry before reattaching.
Where can I buy replacement parts?
Replacement parts such as filters, belts, and attachments are available on the Vivax official website or authorized retailers. Use the model number VCW-2002B to ensure compatibility.
User questions about VCW-2002B Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual VCW-2002B - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VCW-2002B by Vivax.