Metal Drive II - Uncategorized EBS - Free user manual and instructions
Find the device manual for free Metal Drive II EBS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Guitar/Bass Effects Pedal - Distortion/Metal |
| Brand | EBS |
| Model | Metal Drive II |
| Dimensions | Approx. 120 x 70 x 50 mm (4.7 x 2.8 x 2.0 in) |
| Weight | Approx. 350 g (0.77 lbs) |
| Power Supply | 9V DC, center negative, 2.1mm barrel jack (battery optional) |
| Current Consumption | Approx. 15 mA |
| Input Impedance | 1 MΩ |
| Output Impedance | 10 kΩ |
| Controls | Gain, Level, Low, High, Mid, Mid Freq, Bright |
| Switching | True bypass |
| Functions | Heavy metal distortion with 3-band EQ, mid frequency sweep, and bright switch |
| Construction | Robust metal chassis |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Avoid liquids and abrasives. |
| Safety Instructions | Use only the specified power supply. Do not expose to moisture or extreme temperatures. |
| Spare Parts & Repairability | No user-serviceable parts. Contact authorized service center for repairs. |
| Included Accessories | User manual, sticker (if applicable) |
| Warranty | 2 years (check local regulations) |
| Country of Origin | Sweden |
Frequently Asked Questions - Metal Drive II EBS
How do I power the EBS Metal Drive II?
Use a standard 9V DC power supply with center negative polarity and 2.1mm barrel plug. A 9V battery can also be used if the pedal has a battery compartment. Current draw is approximately 15 mA.
What type of cable should I use?
Standard 1/4' instrument cables. Use high-quality shielded cables to minimize noise.
How do I connect the Metal Drive II in my signal chain?
Connect your instrument to the INPUT jack. Connect the OUTPUT jack to the next pedal or amplifier. For best results, place distortion pedals early in the chain, before modulation or time-based effects.
What do the controls do?
Gain controls distortion amount. Level sets output volume. Low, Mid, High are EQ bands. Mid Freq selects the center frequency of the mid band. Bright adds high-frequency emphasis.
Is the Metal Drive II true bypass?
Yes, the pedal features true bypass switching, ensuring your signal remains uncolored when the effect is off.
Can I use it for bass guitar?
While designed primarily for guitar, the Metal Drive II works well with bass due to its full EQ section. Adjust the Low control to retain low-end punch.
My pedal is not powering on. What should I check?
First, ensure the power supply is connected firmly and provides 9V DC with correct polarity. If using a battery, check if it's fresh and properly inserted. Try a different power cable.
How do I clean the pedal?
Disconnect all cables and power. Wipe the exterior with a soft, dry cloth. Do not use any liquids, solvents, or abrasive cleaners.
Where can I find the user manual?
The manual is available as a free PDF download on the official EBS website or through the product page on notice-facile.com.
What should I do if the pedal needs repair?
The pedal has no user-serviceable parts. Contact the retailer or an authorized EBS service center for repairs. Do not attempt to open the chassis yourself.
User questions about Metal Drive II EBS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Metal Drive II - EBS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Metal Drive II by EBS.
USER MANUAL Metal Drive II EBS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EBS
Model : Metal Drive II
Category : Uncategorized