EUREKA

Opal SRS4 Insert - Heating EUREKA - Free user manual and instructions

Find the device manual for free Opal SRS4 Insert EUREKA in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice EUREKA Opal SRS4 Insert - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wood-Burning Fireplace Insert
Brand Eureka
Model Opal SRS4 Insert
Fuel Type Wood logs
Heat Output 8 kW (approx. 27,300 BTU/h)
Heating Area Up to 150 m²
Efficiency 75%
Dimensions (W x H x D) 600 x 550 x 400 mm
Weight 65 kg
Flue Outlet Diameter 150 mm
Minimum Chimney Height 4.5 m
Material Steel body with cast iron door
Glass Viewing Window Ceramic glass, self-cleaning (air wash system)
Combustion System Pre-heated secondary combustion for cleaner burn
Control Type Manual air control (primary and secondary)
Thermostat Optional remote thermostat available
Safety Features Overheat protection, cool-touch handle, spark guard
Maintenance Daily ash removal; weekly glass cleaning; annual professional inspection
Spare Parts Replaceable door gasket, glass, baffle plate, firebricks
Warranty 2 years (parts and labor)

Frequently Asked Questions - Opal SRS4 Insert EUREKA

What clearance is required from combustible materials?
Maintain at least 600 mm from the sides and top, and 300 mm from the back. Refer to your local building codes for exact distances.
Can I install this insert myself?
Professional installation is strongly recommended. The insert must be connected to a properly lined chimney and comply with all safety standards.
How often should I clean the glass?
Clean the glass weekly using a non-abrasive cleaner and a soft cloth. Avoid cleaning while the glass is hot.
What type of wood should I burn?
Use seasoned hardwood (moisture content below 20%). Avoid green wood, treated wood, or artificial logs.
How do I adjust the burn rate?
Use the primary air control to regulate airflow. Open fully for a fast, hot burn; partially close for a slower, longer burn.
Why does smoke enter the room when I open the door?
Ensure the chimney is warm and drafting properly. Open the air control fully before opening the door to reduce pressure difference.
How often should I clean the chimney?
Have the chimney inspected and cleaned annually by a certified sweep to prevent creosote buildup.
Can I use the insert without electricity?
Yes, the insert is fully mechanical and does not require electricity to operate (no fan or electronic controls).
What spare parts are commonly needed?
Common replacements include the door gasket, glass panel, and baffle plate. These are available from authorized dealers.
How do I dispose of ashes?
Place ashes in a metal container with a tight lid, store outside on a non-combustible surface, and allow them to cool for at least 24 hours before disposal.

User questions about Opal SRS4 Insert EUREKA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual Opal SRS4 Insert - EUREKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Opal SRS4 Insert by EUREKA.

USER MANUAL Opal SRS4 Insert EUREKA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EUREKA

Model : Opal SRS4 Insert

Category : Heating