001 Touch - Uncategorized Lockwood - Free user manual and instructions
Find the device manual for free 001 Touch Lockwood in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Door Lock |
| Brand | Lockwood |
| Model | 001 Touch |
| Connectivity | Standalone (no Wi-Fi/Bluetooth) |
| Power Supply | 4 x AA alkaline batteries (included) |
| Battery Life | Approximately 1 year (10 uses/day) |
| User Capacity | Up to 20 unique user codes + 1 master code |
| Lock Type | Deadbolt, motorized |
| Material | Zinc alloy (front panel), stainless steel (deadbolt) |
| Finish | Matte black or silver (available) |
| Dimensions (Front Panel) | 160 mm x 70 mm x 30 mm |
| Weight (Package) | 1.2 kg |
| Operating Temperature | -10°C to 55°C |
| Water Resistance | IP54 (suitable for covered outdoor use) |
| Installation | Standard American door prep (2-1/8" bore, 1" latch) |
| Key Override | Mechanical key included for backup |
| Functions | Touch keypad, auto-lock (30s to 99s), low battery alert, passage mode |
| Security | Anti-tamper alarm after 5 invalid attempts, encrypted communication |
| Warranty | 2 years (manufacturer defects) |
| Certifications | CE, FCC, ANSI/BHMA Grade 2 |
| Maintenance | Wipe with soft dry cloth; avoid abrasive cleaners |
| Spare Parts | Available from authorized Lockwood dealers (keypad, latch, screw pack) |
Frequently Asked Questions - 001 Touch Lockwood
How do I replace the batteries?
To replace batteries, remove the interior cover by sliding it upward. Replace all 4 AA batteries with new alkaline ones, ensuring correct polarity. Reattach the cover and test the lock.
How do I program a new user code?
Enter the master code (default: 123456) followed by #. Then press 2 and #. Enter a 4-8 digit user code and press # again. The lock will beep to confirm.
What if I forget my master code?
If you forget the master code, you can perform a factory reset. Locate the reset button on the interior panel (under the battery cover). Press and hold for 5 seconds until you hear a long beep. This clears all codes, and the master code returns to 123456.
Can the lock be used in rainy conditions?
Yes, the lock has an IP54 rating, meaning it is protected against dust and splashing water. However, it should be installed under a covered porch or overhang for prolonged exposure.
How do I enable or disable auto-lock?
Enter master code + #, then press 3 and #. The current auto-lock delay is shown. Enter a delay from 30 to 99 seconds, or press 0 to disable auto-lock. Press # to save.
Is there an emergency power option?
Yes, the lock includes an emergency 9V battery terminal on the front panel. If batteries die, hold a 9V battery against the contacts to power the lock temporarily and enter a code.
What is the maximum number of user codes?
The lock can store up to 20 unique user codes, each 4 to 8 digits long. Additionally, one master code (factory set) and one passage mode code are supported.
How do I clean the touch keypad?
Use a soft, dry cloth to gently wipe the keypad. Do not use any abrasive cleaners, solvents, or water, as they may damage the touch sensor.
Does the lock work with a smart home system?
No, the Lockwood 001 Touch is a standalone lock without Wi-Fi or Bluetooth connectivity. It cannot be integrated with smart home platforms.
Where can I buy spare parts or accessories?
Spare parts such as keypads, latch assemblies, and screw packs are available through authorized Lockwood dealers. Contact Lockwood customer support or visit their website to find a dealer near you.
User questions about 001 Touch Lockwood
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 001 Touch - Lockwood and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 001 Touch by Lockwood.