Replay XS082 - Radio Xact - Free user manual and instructions
Find the device manual for free Replay XS082 Xact in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Xact |
| Model | Replay XS082 |
| Product Type | Portable Radio |
| Dimensions (approx.) | 150 x 80 x 30 mm |
| Weight | 300 g (with batteries) |
| Power Source | 2 x AA batteries (not included) or AC adapter (not included) |
| Battery Life | Approximately 20 hours with moderate volume |
| Radio Bands | AM (530-1710 kHz), FM (87.5-108 MHz) |
| Speaker | Built-in 3-inch speaker, 2W output |
| Headphone Jack | 3.5mm stereo jack for private listening |
| Antenna | Telescopic FM antenna; built-in ferrite bar for AM |
| Display | Backlit LCD for frequency and information |
| Memory Presets | Up to 20 FM and 10 AM stations |
| Replay Function | Digital recording and playback of up to 30 seconds of audio |
| Alarm Clock | Wake to radio or buzzer with snooze |
| Sleep Timer | Auto-off from 1 to 90 minutes |
| Volume Control | Rotary knob with power on/off |
| Tuning Control | Rotary knob with fine tune |
| Accessories Included | None (batteries and adapter sold separately) |
| Cleaning | Wipe with dry soft cloth; avoid liquids |
| Safety | Keep away from water and heat sources |
| Repairability | Spare parts may be available; consult Xact support |
Frequently Asked Questions - Replay XS082 Xact
How do I set the time on my Xact Replay XS082?
Press and hold the Clock button for 2 seconds. The hour will flash. Use the Up or Down buttons to adjust, then press Clock again to set minutes. Press Clock once more to confirm.
How do I preset radio stations?
Tune to the desired station, then press and hold one of the Preset buttons (1-5) until you hear a beep. To recall, press the preset button briefly.
What batteries does the Replay XS082 use?
It requires 2 AA batteries (not included). Use alkaline batteries for best performance.
Can I use an AC adapter instead of batteries?
Yes, you can use a 5V/1A micro-USB adapter (not included). Plug it into the DC IN port on the side.
How do I improve FM reception?
Extend the telescopic antenna fully and adjust its angle. For weak signals, try rotating the radio or moving it near a window.
How does the Replay function work?
Press the Replay button to start recording the last 30 seconds of audio. Press again to stop. To replay, press Play. The recording is temporary and overwritten.
How do I set the alarm?
Press the Alarm button. Use Up/Down to set hour, press Alarm to confirm minutes. Choose to wake to Radio or Buzzer. Press Alarm to save.
Why is the display not working?
Check that batteries are installed correctly or the AC adapter is connected. If using batteries, try fresh ones. The backlight may turn off after a few seconds to save power.
How do I reset the radio to factory settings?
Press and hold the Reset button (located in the battery compartment) with a paperclip for 5 seconds. All presets and settings will be cleared.
Is the Replay XS082 water resistant?
No, it is not water resistant. Keep it dry and away from moisture to avoid damage.
User questions about Replay XS082 Xact
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual Replay XS082 - Xact and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Replay XS082 by Xact.
USER MANUAL Replay XS082 Xact
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xact
Model : Replay XS082
Category : Radio