iN199 - Water heaters and boilers Intellihot - Free user manual and instructions
Find the device manual for free iN199 Intellihot in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Heater and Boiler |
| Brand | Intellihot |
| Model | iN199 |
| Category | Water Heaters and Boilers |
| Dimensions (H x W x D) | 36 in x 22 in x 28 in (91.4 cm x 55.9 cm x 71.1 cm) |
| Weight | 150 lbs (68 kg) |
| Power Source | Natural Gas or Propane |
| Input Rating | 199,000 BTU/h |
| Efficiency | Up to 95% thermal efficiency |
| Heat Exchanger | Condensing, copper finned tube |
| Tank Material | Stainless Steel |
| Control System | Electronic ignition with fully modulating burner |
| Safety Features | Flame safeguard, pressure relief valve, freeze protection, high-limit control |
| Maintenance | Annual cleaning of heat exchanger and burner assembly |
| Spare Parts Availability | Available through Intellihot authorized distributors |
| Warranty | Limited: 10 years heat exchanger, 1 year parts |
| Certifications | CSA, UL, NSF 5 |
| Installation Requirements | Indoor, floor standing, vented through rooftop or sidewall (PVC/CPVC) |
Frequently Asked Questions - iN199 Intellihot
What type of gas can I use for the Intellihot iN199?
The unit is compatible with natural gas and propane. Conversion kit may be required for propane use.
What is the minimum clearance required around the unit?
Allow at least 24 inches on top, 6 inches on sides, and 24 inches in front for service access.
How often should I perform maintenance on the iN199?
Annual maintenance is recommended, including cleaning the heat exchanger, checking the burner, and inspecting the vent system.
What venting material is required?
Use PVC, CPVC, or approved polypropylene for the vent system. Do not use metal venting.
How do I reset the unit after a lockout?
Press the Reset button on the control panel. If lockout persists, check for error codes and consult the manual.
What is the maximum temperature setting?
The adjustable temperature range is typically 100°F to 180°F (38°C to 82°C). Default setting is 140°F.
Can the iN199 be installed outdoors?
No, this unit is designed for indoor installation only. It must be protected from freezing temperatures.
What does error code E01 mean?
Error code E01 indicates ignition failure. Check gas supply, spark electrode, and gas valve.
How do I reduce water temperature fluctuations?
Ensure the bypass valve is properly adjusted and the flow rate is within the specified range (1.0-4.0 GPM).
Where can I find replacement parts?
Contact an Intellihot authorized distributor or visit the official website to order parts.
User questions about iN199 Intellihot
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual iN199 - Intellihot and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iN199 by Intellihot.
USER MANUAL iN199 Intellihot
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellihot
Model : iN199
Category : Water heaters and boilers