SDA-1100U - Screwdriver Ozito - Free user manual and instructions
Find the device manual for free SDA-1100U Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded electric screwdriver |
| Brand | Ozito |
| Model | SDA-1100U |
| Power input | 1100 W |
| Rated voltage | 230-240 V ~ 50 Hz |
| No load speed | 0-3000 rpm, variable |
| Chuck type | 1/4" hex quick-release |
| Maximum screw diameter | 6 mm (typical) |
| Forward/reverse rotation | Yes, with switch |
| Lock-on button | Yes, for continuous use |
| LED light | Yes, for illumination |
| Cord length | 2.5 m |
| Dimensions (L x W x H) | 260 x 50 x 90 mm |
| Weight | 1.3 kg |
| Housing material | ABS plastic with rubber grip |
| Maintenance | Clean with dry cloth; check carbon brushes regularly |
| Safety features | Double insulated; lock-off trigger |
| Spare parts available | Carbon brushes, chuck, switch |
| Warranty | 2 years (subject to conditions) |
| Repairability | User-serviceable brushes; professional repair for others |
Frequently Asked Questions - SDA-1100U Ozito
How do I change the bit on the Ozito SDA-1100U?
Pull back the chuck collar, insert the 1/4 inch hex bit, and release the collar to lock it in place.
Can this screwdriver be used as a drill?
No, the SDA-1100U is a dedicated screwdriver without a drill mode or hammer action.
What is the maximum screw size it can drive?
Typically up to 6 mm diameter for wood screws; larger screws may require pre-drilling.
Is the speed variable?
Yes, the trigger allows variable speed control from 0 to 3000 rpm for precise driving.
How do I clean and maintain the tool?
Unplug the tool, wipe with a dry cloth, and periodically check carbon brushes for wear. Replace if worn beyond 6 mm.
What safety precautions should I take?
Always wear safety glasses, disconnect power before changing bits, and keep hands away from rotating parts. The tool is double insulated, so no grounding required.
Does the screwdriver have a built-in light?
Yes, it features an LED light that illuminates the work area when the trigger is pressed.
Can I use this tool for masonry or metal?
It is designed for wood and soft materials. For metal, use a drill; for masonry, use a hammer drill.
What is the cord length?
The power cord is approximately 2.5 meters long, providing a good range of movement.
Where can I buy replacement parts?
Replacement parts like carbon brushes and chuck are available from Ozito service centers or online parts retailers.
User questions about SDA-1100U Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual SDA-1100U - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDA-1100U by Ozito.
USER MANUAL SDA-1100U Ozito
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ozito
Model : SDA-1100U
Category : Screwdriver