OSDK-536 - Screwdriver Ozito - Free user manual and instructions
Find the device manual for free OSDK-536 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Model Number | OSDK-536 |
| Brand | Ozito |
| Voltage | 3.6 V |
| Battery Type | Lithium-Ion |
| Chuck Type | Keyless, 1/4" Hex |
| No-Load Speed | 200 RPM |
| Torque Range | 0.5 - 4 Nm |
| LED Light | Yes, built-in |
| Forward/Reverse | Yes, slide switch |
| Dimensions (L x W x H) | 205 x 48 x 48 mm |
| Weight (without battery) | 0.28 kg |
| Charging Time | 3 - 5 hours |
| Battery Capacity | 1.5 Ah |
| Charger Included | Yes, 3.6 V charger |
| Maximum Screw Size | 5 mm (wood screw) |
| Housing Material | ABS Plastic with rubber grip |
| Storage Case | Not included |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety Features | Overcharge protection, low battery indicator |
| Spare Parts Available | Battery pack, charger, chuck |
Frequently Asked Questions - OSDK-536 Ozito
How do I charge the Ozito OSDK-536 screwdriver?
Connect the charger to the screwdriver's charging port and plug into a mains outlet. The LED indicator will show red during charging and green when fully charged. Typical charging time is 3-5 hours.
What type of bits does the OSDK-536 use?
It uses 1/4 inch hex shank bits (6.35 mm). Standard screwdriver bits and nut drivers are compatible.
How do I change the direction of rotation?
Use the forward/reverse slide switch located above the trigger. Slide it to the left for forward (tightening) and to the right for reverse (loosening).
What is the maximum torque of this screwdriver?
The Ozito OSDK-536 has a torque range of 0.5 to 4 Nm, suitable for light-duty screwing tasks like assembling furniture or electronics.
Can I use the screwdriver while it is charging?
No, do not use the screwdriver while connected to the charger. It is designed for cordless operation only when disconnected from the charger.
How do I clean and maintain the screwdriver?
Wipe the housing with a dry, soft cloth. Do not use harsh chemicals or water. Keep the chuck clean and lubricate it occasionally with light machine oil.
What should I do if the battery does not hold a charge?
Ensure the charger is working properly. If the battery still won't charge, it may need replacement. Only use genuine Ozito replacement battery packs.
Is the LED light always on?
The LED light turns on automatically when the trigger is pressed. It provides illumination in dark work areas and turns off when the trigger is released.
Can I use this screwdriver for drilling?
No, the OSDK-536 is designed for screwdriving only. It does not have the torque or speed for drilling holes; use a proper drill for that purpose.
Where can I find spare parts for the OSDK-536?
Spare parts like battery packs, chargers, and chucks are available through Ozito's official website or authorized service centers. Check your local hardware store as well.
User questions about OSDK-536 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual OSDK-536 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OSDK-536 by Ozito.
USER MANUAL OSDK-536 Ozito
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ozito
Model : OSDK-536
Category : Screwdriver