IndustrialPro SN-6600 - Router Sixnet - Free user manual and instructions
Find the device manual for free IndustrialPro SN-6600 Sixnet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Router |
| Brand | Sixnet |
| Model | IndustrialPro SN-6600 |
| Dimensions (W x D x H) | 4.5 x 3.5 x 1.2 inches (114 x 89 x 30 mm) |
| Weight | 0.6 lbs (270 g) |
| Power Input | 12-48 VDC (dual redundant inputs) |
| Power Consumption | 10W typical |
| Ethernet Ports | 6 x 10/100/1000 Mbps RJ45 |
| Serial Ports | 2 x RS-232/422/485 (DB9) |
| Wireless | 802.11a/b/g/n/ac (dual band) |
| Operating Temperature | -40°C to 75°C |
| Humidity | 5% to 95% non-condensing |
| Mounting | DIN rail or panel mount |
| VPN Support | OpenVPN, IPsec, PPTP, L2TP |
| Firewall | Stateful packet inspection, NAT, ACL |
| Protocols | Modbus TCP, DNP3, PROFINET, EtherNet/IP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, NMS |
| Security | 802.1X, RADIUS, TACACS+, SSL/TLS |
| Spare Parts | Power supply modules, antennas, DIN rail kit |
| Maintenance | Clean with dry cloth; no user-serviceable parts inside |
| Certifications | CE, FCC, UL, IEC 61850, IEEE 1613 |
Frequently Asked Questions - IndustrialPro SN-6600 Sixnet
How do I access the web interface of the IndustrialPro SN-6600?
Connect a computer to one of the Ethernet ports. Set your computer's IP to 192.168.1.x (e.g., 192.168.1.2) with subnet mask 255.255.255.0. Open a browser and go to 192.168.1.1. Default credentials are admin/admin.
What is the default IP address of the router?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0.
How can I reset the router to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. The lights will flash, indicating a reset. All settings will be restored to factory defaults.
What are the supported VPN protocols?
The router supports OpenVPN, IPsec, PPTP, and L2TP VPN protocols. Configuration is done via the VPN section in the web interface.
How do I configure the router for Modbus TCP communication?
Go to Services > Modbus in the web interface. Enable the Modbus TCP gateway and specify the slave devices and port numbers. Ensure firewall rules allow Modbus traffic (default port 502).
What is the operating temperature range?
The IndustrialPro SN-6600 is rated for -40°C to 75°C (-40°F to 167°F), making it suitable for harsh environments.
Can I use the router with a DIN rail mount?
Yes, the device comes with a DIN rail mounting bracket that can be attached to the back panel. Alternatively, it can be panel-mounted using screws.
How do I update the firmware?
Download the latest firmware from the Sixnet website. In the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the upgrade.
What is the power supply requirement?
The router accepts 12-48 VDC input via the terminal block. It has dual redundant power inputs for backup. Maximum power consumption is approximately 10W.
How do I enable wireless on the router?
Navigate to Network > Wireless in the web interface. Enable the wireless interface, configure SSID and security (recommend WPA2-AES), and set the country. The router supports 2.4 GHz and 5 GHz bands.
User questions about IndustrialPro SN-6600 Sixnet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual IndustrialPro SN-6600 - Sixnet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IndustrialPro SN-6600 by Sixnet.
USER MANUAL IndustrialPro SN-6600 Sixnet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sixnet
Model : IndustrialPro SN-6600
Category : Router