FX340GW-2 - Fire Extinguisher KIDDE - Free user manual and instructions
Find the device manual for free FX340GW-2 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Kidde |
| Model | FX340GW-2 |
| Type | Fire Extinguisher |
| Classification | 5-B:C |
| Extinguishing Agent | Dry Chemical (Monoammonium Phosphate) |
| Capacity | 2.5 lb (1.1 kg) |
| Discharge Time | 10-12 seconds |
| Operating Range | 6-10 ft (1.8-3 m) |
| Pressure Gauge | Yes, easy-to-read |
| Height | 14.5 in (36.8 cm) |
| Diameter | 4.5 in (11.4 cm) |
| Weight | 4.2 lb (1.9 kg) |
| Mounting Bracket | Included |
| Operating Temperature | 40°F to 120°F (4°C to 49°C) |
| Safety Pin | With tamper seal |
| Handle Design | Ergonomic, easy squeeze |
| Corrosion Resistance | Valve and cylinder treated |
| Warranty | 6 years limited |
| Certifications | UL Listed |
| Maintenance | Monthly visual inspection, recharge after use |
Frequently Asked Questions - FX340GW-2 KIDDE
What types of fires can the FX340GW-2 extinguish?
The Kidde FX340GW-2 is classified 5-B:C, meaning it is effective against Class B (flammable liquids) and Class C (electrical) fires. It is not suitable for Class A fires (ordinary combustibles like wood or paper).
How do I use this fire extinguisher?
Remember the PASS technique: Pull the pin, Aim low at the base of the fire, Squeeze the handle, and Sweep from side to side. Stand 6-10 feet away.
What does the pressure gauge indicate?
The gauge shows the internal pressure. When the needle is in the green zone, the extinguisher is properly pressurized. If it enters the red zones (over or under), the unit needs service or replacement.
How often should I inspect the extinguisher?
Perform a monthly visual inspection: check the gauge is in the green, ensure the pin and seal are intact, and look for any dents or corrosion. Shake the unit gently to prevent powder caking.
What maintenance is required after use?
After any use, even partial, the extinguisher must be recharged by a certified professional. Do not simply re-pressurize without refilling the agent.
What is the lifespan of this extinguisher?
The extinguisher has a 6-year limited warranty, but its functional lifespan depends on storage conditions. Typically, units should be replaced every 12 years if never used, or earlier if damaged.
Can I recharge the FX340GW-2 myself?
No, recharging requires specialized equipment and training. Take it to a fire equipment service center to have it professionally recharged.
How should I dispose of an old extinguisher?
If the extinguisher is expired or damaged, empty it by discharging in a safe outdoor area (away from combustibles). Then recycle the metal cylinder at a local scrap yard or check with your waste management.
Where should I mount the extinguisher?
Mount it in an easily accessible location, away from potential fire sources (like kitchen or garage). Keep it at least 4 inches off the floor to avoid corrosion and damage.
What is the operating temperature range?
The extinguisher is rated for use in temperatures between 40°F and 120°F (4°C to 49°C). Do not expose to freezing conditions as the internal components may be damaged.
User questions about FX340GW-2 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fire Extinguisher in PDF format for free! Find your manual FX340GW-2 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX340GW-2 by KIDDE.
USER MANUAL FX340GW-2 KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : FX340GW-2
Category : Fire Extinguisher