FA110G - Fire Extinguisher KIDDE - Free user manual and instructions
Find the device manual for free FA110G KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fire Extinguisher |
| Brand | Kidde |
| Model | FA110G |
| Classification | 1-A:10-B:C |
| Agent Type | Dry Chemical (Monoammonium Phosphate) |
| Capacity | 2.5 lb (1.1 kg) |
| Discharge Time | 8–10 seconds |
| Discharge Range | 5–8 ft (1.5–2.4 m) |
| Operating Pressure | 195 psi (13.4 bar) |
| Operating Temperature | 40°F to 120°F (4°C to 49°C) |
| Height | 14.75 inches (37.5 cm) |
| Diameter | 5.25 inches (13.3 cm) |
| Weight | 5.4 lb (2.45 kg) |
| Material | Steel cylinder with plastic handle |
| UL Listing | UL 299 and ANSI/UL 711 |
| Rechargeable | Yes, by certified service center |
| Mounting Bracket | Included |
| Service Pressure Indicator | Pressure gauge |
| Shell Test Pressure | 350 psi (24.1 bar) |
| Warranty | 6 years limited warranty |
Frequently Asked Questions - FA110G KIDDE
What types of fires can the FA110G extinguish?
The FA110G is rated 1-A:10-B:C, meaning it can handle ordinary combustibles (wood, paper), flammable liquids (gasoline, oil), and electrical fires (energized equipment).
How do I properly mount the FA110G?
Use the included bracket to mount the extinguisher on a wall, ensuring it is easily accessible. The bracket should be installed about 3 to 5 feet off the ground, away from heat sources and in a location visible from the escape route.
How often should I inspect the fire extinguisher?
Perform a visual inspection monthly. Check the pressure gauge (needle should be in the green zone), ensure the safety pin is intact, and look for any physical damage or corrosion. A more thorough annual inspection should be done by a professional.
What does the pressure gauge indicate?
The gauge shows the internal pressure of the extinguisher. If the needle is in the green zone, it is properly pressurized. If in the red (overcharged or undercharged), the extinguisher may not operate correctly and should be serviced.
How do I use the FA110G?
Remember the P.A.S.S. technique: Pull the pin, Aim the nozzle at the base of the fire, Squeeze the handle, Sweep from side to side. Stand about 6 feet away and use short bursts.
Is the FA110G rechargeable after use?
Yes, it is rechargeable by a certified fire protection agency. Do not attempt to refill it yourself. After any use, even partial, have it serviced and recharged immediately.
What is the shelf life of the FA110G?
The extinguisher has a 6-year limited warranty from date of purchase. However, it should be replaced if it has been used, discharged, or if the gauge indicates a problem. Regular hydrostatic testing may be needed per local regulations.
Can the FA110G be used on grease fires?
Yes, it is rated for class B (flammable liquids) which includes cooking oils and grease. However, for kitchen fires, a wet chemical extinguisher is more effective. Always aim at the base of the fire.
How should I clean the extinguisher?
Wipe the exterior with a damp cloth and mild detergent. Avoid using abrasive cleaners that could damage the label or gauge. Ensure the unit is dry before storing. Do not submerge in water.
What does the '1-A:10-B:C' rating mean?
The rating defines the extinguisher's capacity. 1-A means it can extinguish a fire of 1.25 gallons of water equivalent. 10-B covers 10 square feet of flammable liquid. C indicates suitability for electrical fires. Higher numbers mean more capacity.
User questions about FA110G KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fire Extinguisher in PDF format for free! Find your manual FA110G - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FA110G by KIDDE.